OPEL 1.7 DTI Engine Control Unit 8973003261 12214079 – VIRGIN with PIN code
The offered engine control unit with part numbers 8973003261 and 12214079 is an original module manufactured by Delphi Delco Electronics Systems, used in OPEL vehicles equipped with the 1.7 DTI engine. This unit is fully tested, verified and covered by warranty.
This model is prepared as VIRGIN, which means the ECU is reset, ready for adaptation in the vehicle and supplied with a PIN code. After installation, it requires standard programming to the vehicle using Tech-2 or OP-COM. This is a typical procedure to match the ECU to the vehicle via VIN, immobiliser and configuration.
Compatibility by part number – which vehicles does it fit?
The engine control unit 8973003261 / 12214079 is used in selected OPEL models equipped with the 1.7 DTI diesel engine. Most commonly found in:
- OPEL Astra II / Astra G 1.7 DTI
- OPEL Corsa C 1.7 DTI
- OPEL Combo C 1.7 DTI
The typical production years are approximately 2000–2005, depending on vehicle version, market and equipment level. This ECU is associated with 1.7 DTI Isuzu engines, commonly linked with Y17DT engine family and similar diesel variants used in OPEL vehicles during that period.
The most important factor when selecting the correct ECU is always matching the part numbers. If your original unit has 8973003261 or 12214079, it is the key indicator of compatibility.
What does VIRGIN version mean?
The VIRGIN version means the ECU has been reset and prepared for reprogramming in another vehicle. Such a module is not ready for immediate engine start without adaptation. After installation, it must be programmed to the vehicle to properly synchronize with the immobiliser and other electronic systems.
The unit is supplied with a PIN code, required during the programming process. Adaptation must be performed using Tech-2 or OP-COM diagnostic tools.
Important information before purchase
Before purchasing, carefully compare the markings on your original ECU. For models such as OPEL Astra II, OPEL Corsa and OPEL Combo with 1.7 DTI engine, compatibility based on part number is essential. The best way to confirm fitment is to match your existing unit with 8973003261 or 12214079.
FAQ – frequently asked questions
Does engine control unit 8973003261 fit OPEL Astra II 1.7 DTI?
Yes, part number 8973003261 is used in selected versions of OPEL Astra II / Astra G 1.7 DTI. Compatibility should always be confirmed by matching the original ECU number.
Is 12214079 compatible with OPEL Combo 1.7 DTI?
The ECU with part number 12214079 is used in selected OPEL Combo models with 1.7 DTI diesel engine. Always verify compatibility by part number and engine version.
OPEL Corsa C 1.7 DTI – is ECU 8973003261 ready to run after installation?
No, this ECU is supplied as VIRGIN. After installation, it requires programming to the vehicle using Tech-2 or OP-COM.
What does VIRGIN mean for OPEL ECU 12214079?
VIRGIN means the ECU is reset and ready to be programmed to another vehicle. It does not contain previous immobiliser data and must be adapted.
Is a PIN code included with ECU 8973003261?
Yes, the offered engine control unit 8973003261 / 12214079 is supplied as VIRGIN with PIN code, allowing proper programming.
What tool is required to program ECU 12214079 in OPEL?
Programming and adaptation are typically performed using Tech-2 or OP-COM, which are standard tools for OPEL vehicles.
Does ECU 8973003261 work with Y17DT engine?
Part number 8973003261 is associated with 1.7 DTI Isuzu engines, commonly linked to the Y17DT engine family. Final compatibility must be confirmed by part number.
OPEL Astra G 1.7 DTI 12214079 – is immobiliser coding required?
Yes, after installation of a VIRGIN ECU, programming and immobiliser synchronization are required.
Are 8973003261 and 12214079 the same ECU?
Yes, these are identifiers of the same ECU and should be used to confirm compatibility for OPEL Astra II, Combo and Corsa 1.7 DTI.
