ABS pumps at ECUSale – brands and models
An ABS pump is an assembly of a hydraulic block with solenoid valves and a pump motor, plus the ABS control unit bolted to it. The control unit reads the wheel speed sensors and, during braking, regulates the pressure in each wheel circuit to prevent the wheels from locking. In many cars the same module also handles ESP and traction control.
We offer complete ABS pumps for cars and vans. Most units are available for VAG group cars and for Opel and Fiat:
- Volkswagen ABS pumps and Škoda ABS pumps – modules with 1K0614517 blocks and 1K0907379 control units (incl. Golf V, Passat B6, Octavia II) and 6R0614117 pumps for VW Polo and Seat Ibiza,
- Opel ABS pumps – incl. Corsa D, Meriva B, Combo and Antara,
- Fiat ABS pumps – incl. Doblo and Sedici,
- Renault ABS pumps and Ford ABS pumps – including modules for the Mondeo MK IV,
- Suzuki ABS pumps – Swift and SX4,
- individual models for Alfa Romeo, Mercedes-Benz, Toyota, Mazda, Honda, Peugeot, Citroën and Land Rover.
Availability changes all the time, so if you cannot see your number, ask us – we will also check modules that are not listed yet.
How to choose an ABS pump for your car?
The basis is the full number on the label of the original module, not just the car make and model. Before buying, compare:
- the hydraulic block number – e.g. 1K0614517BE or 0265232288,
- the ABS control unit number – e.g. 1K0907379AE or 0265800422,
- the module manufacturer numbers – on ATE pumps usually in the format 10.0212-… (block) and 10.0961-… (control unit), on Bosch pumps numbers starting with 0265,
- the letter suffix or version code – e.g. AQ, FB, FE on Opel Corsa D pumps,
- the system version – ABS and ABS with ESP usually have different numbers and should not be interchanged.
The VIN helps confirm the car's equipment, but does not always identify the exact module version. A photo of the whole label of the old pump is the most reliable.
Same block, different control unit – what to watch out for?
An ABS pump consists of two parts that must match each other. A good example is the Opel Corsa D: the 0265232288 hydraulic block marked FE is available from us in two versions – with control unit 0265800422 and with control unit 0265800796. From the outside the modules look almost identical, but they have different control unit numbers and are not automatically interchangeable.
It is similar in VAG group cars: block 1K0614517BE comes with control unit 1K0907379AE as well as 1K0907379AJ. That is why you should always compare both numbers – block and control unit.
The opposite also happens: the same pump number was used in different models. Examples from our range are the Fiat Doblo and Opel Combo (pump 00051902577) or the Suzuki SX4 and Fiat Sedici (pump 56110-55L10). Compatibility is decided by the number, not the badge on the bonnet.
Used or remanufactured ABS pump?
| Variant |
What it includes |
| Used, tested |
Original module from a dismantled vehicle, checked before dispatch for communication and electronics operation. |
| Remanufactured (renovated) |
Disassembly and cleaning of the unit, replacement of seals, leak test of the hydraulic part and a communication and function test of the control unit. |
The scope of work and warranty terms for a specific pump are given in the product description.
Fitting, bleeding and coding the ABS pump
After replacing the ABS pump, the brake system must be bled according to the vehicle manufacturer's procedure – in many cars this requires a diagnostic tool that activates the module valves.
Whether the pump needs coding depends on the car and the module version. In VAG cars with 1K0614517 pumps, coding and adaptation are usually carried out after fitting (e.g. VCDS or ODIS). For Opel, Tech2 or MDI is most often used, and for Ford, IDS. Information about the required configuration is given in the product description.
Example ABS pumps in our shop
Before ordering, compare the numbers in the description with the label of your module.
Symptoms of a faulty ABS pump
- ABS, ESP or brake warning light on,
- no communication with the ABS module in the diagnostic tool,
- faults of the valves, pump motor or control unit power supply,
- ESP and traction control not working,
- CAN communication faults in other control units.
The same symptoms can be caused by a faulty wheel speed sensor, wiring, fuse or a weak battery. Before replacing the pump, read the fault codes and check the module's power supply and earth connections.
Driving with a non-working ABS is possible, but dangerous – under hard braking the wheels can lock and the car loses steering control.
Testing, warranty and delivery
Every ABS pump is checked before dispatch on a diagnostic bench – after connecting it to power and diagnostic tools, we verify communication and control unit operation. ATE pumps in our range can also be found on the ATE manufacturer page.
Warranty terms are given in each product description. For details, see returns and complaints, delivery times and costs and payment methods.
Can’t find your number?
Send us a photo of the whole label of your old ABS pump (block and control unit), the VIN and whether the car has ESP. We will check compatibility and available modules.
Ask about an ABS pump →
FAQ – ABS pumps
| Question |
Answer |
| Does the ABS pump number have to be identical to the one in my car? |
Yes. Compare the hydraulic block number and the control unit number including the letter suffix. A one-letter difference can mean different software or a different system version. |
| 1K0614517 pump for VW, Audi, Seat and Škoda – how to choose the right one? |
Check the full block number (e.g. 1K0614517BE) and the full control unit number (e.g. 1K0907379AE). The same block comes with different control units, and ESP versions have different numbers than ABS-only versions. |
| Does an ABS pump need coding after fitting? |
It depends on the car and the module. In VAG cars with 1K0614517 pumps, coding and adaptation with a diagnostic tool are usually required. We give this information in the product description. |
| Do the brakes need bleeding after replacing the ABS pump? |
Yes. After disconnecting the brake lines, the system must be bled according to the manufacturer's procedure. In many cars this requires a tool that controls the pump valves. |
| Opel Corsa D ABS pump – what to look out for? |
The block version code (e.g. AQ, FB, FE) and the control unit number. We offer the 0265232288 FE block with control unit 0265800422 or 0265800796 – these are different versions. |
| Can an ABS pump from another model fit my car? |
Yes, if the number is identical. Examples: pump 00051902577 for the Fiat Doblo and Opel Combo, or 56110-55L10 for the Suzuki SX4 and Fiat Sedici. |
| What is the difference between a used and a remanufactured pump? |
A used pump is an original module from a dismantled vehicle, checked before dispatch. A remanufactured pump additionally goes through cleaning, seal replacement and a leak test. The scope of work is given in the product description. |
| Does an ABS warning light always mean a faulty pump? |
No. The cause is often a wheel speed sensor, wiring, a fuse or low voltage. Before buying, read the fault codes and check the module's power supply. |
| Can I drive with a faulty ABS pump? |
The brakes usually work, but without ABS and ESP the wheels can lock under hard braking. This is a real risk, especially on wet or slippery roads. |
| How do I ask about a pump that is not in the shop? |
Send a photo of the block and control unit label and the VIN via the contact form. We will check availability and compatibility. |