Peugeot Body Control Modules – BCM / BSI Electronics
Subcategories and filters
Filters
in category: Peugeot Body Control Modules – BCM / BSI Electronics
Subcategories
Back to: Comfort & Body Control Modules – BCM / BSI / BSM / SAM / UCH / CAS Modules- Peugeot Body Control Modules – BCM / BSI Electronics
Chosen Filters
Price
Vendor
Peugeot BSI & BSM Modules – Body Control Units and Vehicle Electronics
Peugeot BSI and BSM body modules are original vehicle electronic control units responsible for CAN BUS communication, immobilizer management and comfort system operation. This category includes tested Peugeot BSI modules, BSM controllers and body computer units for a wide range of Peugeot passenger cars and commercial vehicles, including Peugeot Boxer.
These modules control and coordinate multiple onboard systems such as central locking, lighting, wipers, electric windows, dashboard communication and engine start authorization. Depending on the vehicle version and equipment configuration, some modules may require programming, telecoding, VIN configuration or immobilizer adaptation after installation using diagnostic systems such as DiagBox, Lexia or Peugeot Planet.
List of products
1361402080 503440270102 BCM Control Unit Module Fiat Ducato Peugeot Boxer Citroen Jumper
1369216080 503440770100 Control Unit Module BCM Fiat Ducato Peugeot Boxer Citroen Jumper
9667199680 BSM-R08 Fuse box module BSM Citroen Peugeot
9675877980 BSM-R02 Delphi BSM Module Fuse Box Citroën Peugeot Genuine Part
Peugeot BSI & BSM Modules – Body Control and Vehicle Electronics Systems
Peugeot BSI and BSM modules are among the most important electronic control units used in Peugeot vehicles. These modules manage communication between different onboard systems and control many of the vehicle’s comfort and electrical functions. This category includes tested Peugeot BSI modules, BSM controllers, body computer units and central electronic modules used in popular models such as Peugeot 207, 208, 307, 308, 407, 508, Partner, Expert and Boxer.
We also offer BSI and BCM modules for Peugeot Boxer, compatible with Fiat Ducato and Citroën Jumper vehicles. These modules handle communication between the engine ECU, immobilizer system, instrument cluster and other vehicle control units through the CAN BUS network. In commercial vehicles, common causes of BSI and BCM module failure include water damage, moisture exposure, corrosion of electronic components and wiring faults.
Depending on the module version, replacement may require VIN coding, immobilizer adaptation, ECU synchronization or vehicle configuration using diagnostic systems such as Diagbox, Lexia or Examiner.
BSI (Built-in Systems Interface) and BSM (Boîtier de Servitude Moteur) modules communicate directly with the engine ECU, immobilizer, instrument cluster and CAN BUS system. These units control functions including central locking, lighting systems, wipers, electric windows, turn signals, engine start authorization and diagnostic communication. In many cases, a faulty BSI or BSM module may cause starting problems, CAN BUS communication failures or random electrical system errors.
Depending on the vehicle model, modules may require programming, VIN configuration, immobilizer synchronization or ECU pairing. The most commonly used diagnostic systems for configuration are Diagbox and Lexia.
Exact part number compatibility is essential. Even visually identical BSI or BSM modules may use different software versions, equipment configurations or CAN BUS communication settings.
Peugeot BSI & BSM Programming and Diagnostics
Modern Peugeot vehicles use advanced body electronics systems, making BSI and BSM modules a central part of the vehicle’s electrical architecture. The BSI module manages communication between control units and comfort systems, while the BSM module controls power supply and operation of selected electrical components inside the engine bay.
Typical symptoms of a faulty Peugeot BSI or BSM module include:
- engine not starting,
- immobilizer active message,
- CAN BUS communication failure,
- no diagnostic communication,
- lights or wipers not functioning correctly,
- wipers activating unexpectedly,
- central locking failure,
- fuel pump control problems,
- body electronics faults,
- battery drain after ignition off.
Every module is tested for communication and correct operation before shipping. In many cases, modules can also be prepared for reprogramming or adaptation inside the vehicle.
FAQ – Peugeot BSI & BSM Body Modules
Does a Peugeot BSI module require programming?
Yes. In most cases, the BSI module requires configuration and immobilizer adaptation after installation using Diagbox or Lexia.
What does the Peugeot BSM module control?
The BSM module controls selected electrical circuits inside the engine compartment, including lighting systems, fuel pump operation, cooling fans and power supply for various control units.
Does a CAN BUS communication error always mean the BSI module is faulty?
No. CAN BUS communication issues may also be caused by damaged wiring, poor power supply, corroded connectors or another faulty control unit connected to the CAN network.
How do I choose the correct Peugeot BSI or BSM module?
The most important factor is matching the original part number and manufacturer markings exactly. Even visually similar modules may use different software versions or equipment configurations.
Is the Peugeot BSI module responsible for the immobilizer system?
Yes. In many Peugeot models, the BSI module communicates directly with the immobilizer, vehicle key and engine ECU.
Which Peugeot models use BSI and BSM modules?
BSI and BSM modules are commonly used in vehicles such as Peugeot 206, 207, 208, 307, 308, 407, 508, Partner, Expert and Boxer.
