Skoda ABS pumps in our range
Skoda uses the same ABS assemblies as Volkswagen, Audi and Seat. That is why this category contains modules listed as shared between several group brands. Each assembly has two numbers: the hydraulic block and pump number (1K0614517… or 6R0614117…) and the control unit number (1K0907379… or 6R0907379…). We offer complete assemblies, i.e. the pump together with the control unit.
Where to find the numbers on a Skoda ABS pump
The numbers are on the labels on the hydraulic block and on the control unit housing. They usually include:
- the VAG pump number with a letter ending – e.g. 1K0614517AS,
- the VAG control unit number with an ending – e.g. 1K0907379AH,
- the manufacturer numbers – e.g. 10021204804.
Take a photo of both labels before removal – once removed, the module is often dirty and the labels hard to read. The VIN lets you check the car version but does not replace the numbers on the module. Also compare the range in the Volkswagen ABS pumps category – the same assemblies are used in VW.
Different endings – different versions
1K0614517 pumps differ in the number ending (e.g. AS, BD, BK, CP, DP, ED) and in the control unit paired with them (e.g. 1K0907379AH, AD, AP, BE, BL, BM). The versions differ in equipment and software, so do not assume interchangeability just because the beginning of the number matches. The safest choice is an assembly with identical pump and control unit numbers.
| Pump number |
Control unit number |
Description in our range |
| 1K0614517AS |
1K0907379AH |
Volkswagen, Skoda – complete assembly |
| 1K0614517ED |
1K0907379BM |
VW, Skoda, Audi |
| 1K0614517CP |
1K0907379BE |
VW, Audi, Seat, Skoda |
| 1K0614517DP |
1K0907379BL |
VW, Audi, Seat, Skoda |
| 6R0614117P |
6R0907379AB |
VW, Seat, Skoda |
The table shows examples from our range, not a complete list of applications.
Fitting and coding
After replacing the ABS assembly, the brake system must be bled. According to the product descriptions, VAG assemblies usually require the coding to be transferred from the old control unit, as well as adaptation and a sensor test – this is done with suitable diagnostic software. The requirements for each number are given on the product page.
Example ABS pumps for Skoda
Compare the numbers with the labels on your module before ordering.
Symptoms of an ABS system fault
- ABS, ESP or brake warning light on the dashboard,
- pump, valve or control unit supply faults,
- no diagnostic connection with the ABS module.
A common cause of the warning light is the wheel speed sensors, reluctor rings or wiring rather than the pump itself. Run a diagnosis before buying. Engine control units for Skoda are in the Skoda engine control units category.
Tests, warranty and delivery
Every module is checked before dispatch on a test bench – connected to power and diagnostic tools outside the vehicle. The warranty period and terms are given in each product description. Before ordering you can check delivery times and shipping costs, payment methods and our returns and complaints policy.
Can't find your part number?
Send us a photo of the full label of the original module, the VIN and details of the engine and gearbox. We will check the numbers and availability.
Ask about a Skoda ABS pump →
FAQ – Skoda ABS pumps
| Question |
Answer |
| Does an ABS pump from a Volkswagen fit a Skoda? |
Many assemblies are shared between VW, Audi, Seat and Skoda. The pump and control unit numbers decide, not the car brand. |
| Where is the ABS pump number on a Skoda? |
On the label on the hydraulic block; the control unit number is on the housing of the electronic module. |
| Is 1K0614517 with a different ending the same pump? |
No. Different endings mean different versions. Order an assembly with identical numbers. |
| Is coding needed after fitting? |
Usually the coding must be transferred from the old control unit, the system bled and an adaptation carried out. |
| Do you sell complete assemblies? |
Yes, in this category we offer the ABS pump together with the control unit. |
| Are the pumps checked before dispatch? |
Yes, every assembly is tested on a bench before dispatch. |