Pump 1K0614517ED and control unit 1K0907379BM in one module
You get the pump (hydraulic block) and the ABS control unit together – the whole ATE module for VW / Audi / Seat / Škoda. The label has the numbers 1K0614517ED and 1K0907379BM.
Used, after a workshop test: electronics and hydraulics checked on a test machine, together with a pressure test.
When ABS pump 1K0614517ED may be faulty
- the ABS or ESP light (or both) is on,
- pump motor, valve or ABS control unit supply faults are stored,
- the tester cannot connect to the ABS control unit,
- one of the wheels brakes less or locks.
Before buying a pump, run diagnostics – the ABS light often comes on because of a wheel speed sensor, the ABS ring or the wiring. Details: ABS pump failure – symptoms and refurbishment.
VCDS coding after replacement
- bleed the brake system,
- carry out short and long coding with VCDS,
- add the sensors, e.g. the steering angle sensor,
- finally run short coding again – it saves the whole configuration.
Label – pump and control unit numbers
| Marking | Number (different formats) |
| Pump number (OEM) | 1K0614517ED / 1K0 614 517 ED |
| ABS control unit (OEM) | 1K0907379BM / 1K0 907 379 BM |
| Hydraulic block / pump – manufacturer number | 10.0212-0984.4 / 10021209844 |
Where this number was used
Number 1K0614517ED is used in VAG group cars – confirmed applications: VW Caddy III (2K, 2011–2015), VW Scirocco III, VW Golf VI. The number is what decides: check that the pump and control unit numbers match the label of your module.
See also
Other VAG pumps numbered 1K0 614 517 – different versions, the full number on your pump label decides: 1K0614517AS / 1K0907379AH, 1K0614517BD / 1K0907379AD, 1K0614517BK / 1K0907379AP.
Warranty and delivery
Warranty: 6 months. More pumps in the Volkswagen VW ABS Pumps / Škoda ABS Pumps category. Not sure it fits? Send us a photo of the label and we will check the numbers.
FAQ – 1K0614517ED
| Question |
Answer |
| Is pump 1K0614517ED tested? |
Yes. It is a used unit tested on a machine – electronics, hydraulics and a pressure test. |
| Is it worth running diagnostics before buying a pump? |
Yes. The ABS light is often caused by a wheel speed sensor, the ABS ring or the wiring rather than the pump itself. |
| How do I code pump 1K0614517ED after replacement? |
With VCDS: short and long coding, adding the sensors and short coding again. Bleed the brake system beforehand. |
| How can I check that 1K0614517ED fits my car? |
The numbers on the label of your module must match: pump 1K0614517ED, control unit 1K0907379BM. Application: VAG PQ35 (VW, Audi, Seat, Škoda). |