Peugeot ABS pump in stock
We sell a complete unit: the hydraulic block with pump together with the control unit. On a Peugeot ABS module there are usually three important numbers – the PSA number (10 digits, e.g. 9659136980), the hydraulic block number and the manufacturer’s control unit number.
| Item |
Number |
| PSA number |
9659136980 |
| Hydraulic block |
10020700684 (10.0207-0068.4) |
| ABS control unit |
10097011283 (10.0970-1128.3) |
How to choose an ABS pump for a Peugeot
Compare all three numbers with the labels on your module. The same Peugeot model could have different ABS units depending on version, engine and equipment, e.g. ESP. The VIN helps confirm the vehicle version but does not replace the module numbers. If the numbers match, the unit fits your car. If in doubt, send us a photo of the labels.
See: ABS pump 9659136980 / 10020700684 / control unit 10097011283 – Peugeot, Citroën.
The same unit was also used in Citroën vehicles, so it is also listed in the Citroën ABS pumps category.
Fitting
After fitting an ABS pump the brake system must be bled. Before buying, check with your workshop whether your vehicle version needs configuration in diagnostics after the replacement.
Symptoms of an ABS system fault
- ABS or ESP warning light on the dashboard,
- pump, solenoid valve or control unit power faults in diagnostics,
- no communication with the ABS control unit.
The ABS light is often caused by a wheel speed sensor, an ABS reluctor ring or the wiring rather than the pump itself – so run diagnostics before you buy. Engine control units for Peugeot are in the Peugeot engine control units category, transmission control units in Peugeot transmission control units, and BSI modules in Peugeot BSI / BSM modules.
Testing, warranty and delivery
Every module is checked before dispatch on a test bench – connected to power and diagnostic tools outside the vehicle. The warranty period and terms are given in each product description. Before ordering you can check delivery times and costs, payment methods and our returns and complaints policy.
Can't find your part number?
Send us a photo of the full label on your original module, the VIN and the engine details. We will check the numbers and availability.
Ask about a Peugeot ABS pump →
FAQ – Peugeot ABS pumps
| Question |
Answer |
| Which number matters most? |
Compare all of them: PSA number 9659136980, block number 10020700684 and control unit number 10097011283. |
| Does a Citroën pump fit a Peugeot? |
Peugeot and Citroën share PSA components. If the numbers on the module are identical, the unit fits. |
| Do you sell the pump together with the control unit? |
Yes, it is a complete unit: pump with hydraulic block and control unit. |
| Is the pump checked before dispatch? |
Yes, every unit is bench-tested before dispatch. |