ABS pump 1K0614517BK with control unit 1K0907379AP
Complete ATE ABS pump for VW / Audi / Seat / Škoda: the set includes the hydraulic block (pump) and the ABS control unit – hydraulics and electronics in one module. The label shows the numbers 1K0614517BK and 1K0907379AP.
Condition: refurbished. The hydraulics have been cleaned, the processor replaced with a new one and the electronics checked. Finally, the hydraulics pass a pressure test on a test machine.
Numbers on the label
| Marking | Number (different formats) |
| Pump number (OEM) | 1K0614517BK / 1K0 614 517 BK |
| ABS control unit (OEM) | 1K0907379AP / 1K0 907 379 AP |
| Hydraulic block / pump – manufacturer number | 10.0619-3066.1 / 10061930661 |
| ABS control unit – manufacturer number | 10.0961-0315.3 / 10096103153 |
Each number is shown in several formats, because that is how it is printed on labels and typed into search engines.
Vehicle compatibility
Number 1K0614517BK is used in VAG group cars – confirmed applications: VW Golf VI (2009–2013). The car model alone is not enough – compare the pump and control unit numbers with the label on your module. The same pump is also available used and checked.
See also
Other VAG pumps numbered 1K0 614 517 – different versions, the full number on your pump label decides: 1K0614517ED / 1K0907379BM, 1K0614517AS / 1K0907379AH, 1K0614517BD / 1K0907379AD, 1K0614517BE / 1K0907379AJ.
Failure symptoms
- ABS and/or ESP light is on,
- pump motor, valve or control unit supply faults,
- no communication with the ABS control unit.
The same symptoms can come from a faulty wheel speed sensor, ABS ring or wiring, so run diagnostics before buying. More information: ABS pump failure – symptoms and refurbishment.
Fitting in a VAG group car
After replacing the pump, bleed the brakes and code the module with VCDS. The order: short and long coding, adding the sensors (e.g. steering angle), and short coding again to save the whole configuration.
Warranty and other pumps
The warranty is 6 months. Other ABS pumps are in the Volkswagen VW ABS Pumps / Škoda ABS Pumps category. If you are unsure about compatibility, send a photo of the label – we will compare the numbers.
1K0614517BK / 1K0907379AP – common questions
| Question |
Answer |
| Can you check compatibility for me? |
Yes. Send a photo of your pump label – we will compare the numbers. |
| Does the pump need coding after fitting? |
Yes, with VCDS: short and long coding, adding the sensors, then short coding again. Bleed the brake system first. |
| Is it worth running diagnostics before buying a pump? |
Yes. The ABS light is often caused by a wheel speed sensor, the ABS ring or the wiring rather than the pump itself. |
| How can I check that 1K0614517BK fits my car? |
The numbers on the label of your module must match: pump 1K0614517BK, control unit 1K0907379AP. Application: VAG PQ35 (VW, Audi, Seat, Škoda). |
| What is different about the refurbished version? |
It has cleaned hydraulics, a new processor and checked electronics, and the hydraulics pass a pressure test on a test machine. |