ABS pump 1K0614517BD with control unit 1K0907379AD
Complete ATE ABS pump for VW / Audi / Seat / Škoda: the set includes the hydraulic block (pump) and the ABS control unit – hydraulics and electronics in one module. The label shows the numbers 1K0614517BD and 1K0907379AD.
Condition: refurbished. The pump has been fully refurbished: cleaned hydraulics, a new processor, checked electronics and a hydraulic pressure test on a test machine.
Where this number was used
Number 1K0614517BD is used in VAG group cars (VW, Audi, Seat, Škoda) with the ATE MK60 system. Before buying, compare the pump and control unit numbers with the label of your module, because the number decides the match. The same pump is also available used and checked.
See also
Other VAG pumps numbered 1K0 614 517 – different versions, the full number on your pump label decides: 1K0614517ED / 1K0907379BM, 1K0614517AS / 1K0907379AH, 1K0614517BK / 1K0907379AP, 1K0614517BE / 1K0907379AJ.
Pump 1K0614517BD markings
| Marking | Number (different formats) |
| Pump number (OEM) | 1K0614517BD / 1K0 614 517 BD |
| ABS control unit (OEM) | 1K0907379AD / 1K0 907 379 AD |
| Hydraulic block / pump – manufacturer number | 10.0212-0220.4 / 10021202204 |
| ABS control unit – manufacturer number | 10.0961-0307.3 / 10096103073 |
Each number is shown in several formats, because that is how it is printed on labels and typed into search engines.
Typical ABS module faults
A faulty pump or control unit can show up as:
- ABS and/or ESP light on,
- fault codes for the pump motor, valves or ABS control unit supply,
- no communication with the ABS module in diagnostics,
- weaker braking or one wheel locking.
However, the ABS light is often caused by a wheel speed sensor, the ABS ring or the wiring rather than the pump itself. Run diagnostics before buying and see our guide ABS pump failure – symptoms and refurbishment.
Fitting and coding
After fitting, the brake system must be bled. On VW, Audi, Seat and Škoda the module is coded with VCDS after replacement: short and long coding, adding the sensors (e.g. the steering angle sensor), and finally short coding again, which saves the whole configuration.
Warranty and other pumps
The warranty is 6 months. Other ABS pumps are in the Volkswagen VW ABS Pumps / Škoda ABS Pumps category. If you are unsure about compatibility, send a photo of the label – we will compare the numbers.
Questions about ABS pump 1K0614517BD
| Question |
Answer |
| Will pump 1K0614517BD fit my car? |
Compare the numbers on the label: pump 1K0614517BD and control unit 1K0907379AD. Application: VAG PQ35 (VW, Audi, Seat, Škoda). Matching numbers are decisive. |
| Am I buying just the pump or the whole module? |
The whole module: the hydraulic block together with ABS control unit 1K0907379AD. |
| What does the refurbishment of pump 1K0614517BD include? |
Cleaning the hydraulics, a new processor, checking the electronics and a hydraulic pressure test on a test machine. |
| Can you check compatibility for me? |
Yes. Send a photo of your pump label – we will compare the numbers. |
| Does the pump need coding after fitting? |
Yes, with VCDS: short and long coding, adding the sensors, then short coding again. Bleed the brake system first. |