ABS pump 1K0614517DN with control unit 1K0907379BK
Complete ATE ABS pump for VW / Audi / Seat / Škoda: the set includes the hydraulic block (pump) and the ABS control unit – hydraulics and electronics in one module. The label shows the numbers 1K0614517DN and 1K0907379BK.
Condition: used. Before sale the pump is tested on a machine – we check the electronics and hydraulics, including a pressure test.
Vehicle compatibility
Number 1K0614517DN is used in VAG group cars (VW, Audi, Seat, Škoda) with the ATE MK60 system. The pump is always matched by the number – compare the pump and control unit numbers with the label of your module.
Similar ABS pumps
Other VAG pumps numbered 1K0 614 517 – different versions, the full number on your pump label decides: 1K0614517ED / 1K0907379BM, 1K0614517AS / 1K0907379AH, 1K0614517BD / 1K0907379AD, 1K0614517BK / 1K0907379AP.
Failure symptoms
- ABS and/or ESP light is on,
- pump motor, valve or control unit supply faults,
- no communication with the ABS control unit,
- one wheel brakes less or locks.
The same symptoms can come from a faulty wheel speed sensor, ABS ring or wiring, so run diagnostics before buying. More information: ABS pump failure – symptoms and refurbishment.
Label – pump and control unit numbers
| Marking | Number (different formats) |
| Pump number (OEM) | 1K0614517DN / 1K0 614 517 DN |
| ABS control unit (OEM) | 1K0907379BK / 1K0 907 379 BK |
| Hydraulic block / pump – manufacturer number | 10.0212-0700.4 / 10021207004 |
| ABS control unit – manufacturer number | 10.0961-0363.3 / 10096103633 |
Fitting in a VAG group car
After replacing the pump, bleed the brakes and code the module with VCDS. The order: short and long coding, adding the sensors (e.g. steering angle), and short coding again to save the whole configuration.
Warranty and delivery
Warranty: 6 months. More pumps in the Volkswagen VW ABS Pumps / Škoda ABS Pumps category. Not sure it fits? Send us a photo of the label and we will check the numbers.
Questions about ABS pump 1K0614517DN
| Question |
Answer |
| Is pump 1K0614517DN tested? |
Yes. It is a used unit tested on a machine – electronics, hydraulics and a pressure test. |
| How do I code pump 1K0614517DN after replacement? |
With VCDS: short and long coding, adding the sensors and short coding again. Bleed the brake system beforehand. |
| The ABS light is on – is it definitely the pump? |
Not necessarily. A wheel speed sensor, the ABS ring or the wiring is often to blame, so run diagnostics before buying. |
| How can I check that 1K0614517DN fits my car? |
The numbers on the label of your module must match: pump 1K0614517DN, control unit 1K0907379BK. Application: VAG PQ35 (VW, Audi, Seat, Škoda). |