Pump 13426850 and control unit 0265956075 in one module
You get the pump (hydraulic block) and the ABS control unit together – the whole Bosch module for Opel Meriva B. The label has the numbers 13426850 and 0265956075.
Used, after a workshop test: electronics and hydraulics checked on a test machine, together with a pressure test.
Typical ABS module faults
A faulty pump or control unit can show up as:
- ABS and/or ESP light on,
- fault codes for the pump motor, valves or ABS control unit supply,
- no communication with the ABS module in diagnostics.
However, the ABS light is often caused by a wheel speed sensor, the ABS ring or the wiring rather than the pump itself. Run diagnostics before buying and see our guide ABS pump failure – symptoms and refurbishment.
Vehicle compatibility
Confirmed application: Opel Meriva B. Before buying, compare the pump and control unit numbers with the label of your module, because the number decides the match.
Other versions in stock
Same car model, different pump and module numbers – the number on your pump label decides which one fits: 0265238000 / 0265950820, 0265238098 / 0265951794.
Label – pump and control unit numbers
| Marking | Number (different formats) |
|---|
| Opel / GM number | 13426850 |
| Hydraulic block / pump – manufacturer number | 0265242277 / 0 265 242 277 |
| ABS control unit – manufacturer number | 0265956075 / 0 265 956 075 |
We list the numbers in several formats – as they appear on labels and as people type them into search engines.
Fitting and adaptation
- after fitting, always bleed the brake system,
- coding or adaptation with a tester – depending on the car and the pump type; not every pump needs it.
Warranty and delivery
Warranty: 6 months. More pumps in the Opel ABS Pumps category. Not sure it fits? Send us a photo of the label and we will check the numbers.
13426850 / 0265956075 – common questions
| Question |
Answer |
| I am not sure the pump fits – what should I do? |
Send us a photo of your module label and we will check the numbers. |
| Is it worth running diagnostics before buying a pump? |
Yes. The ABS light is often caused by a wheel speed sensor, the ABS ring or the wiring rather than the pump itself. |
| How do you check the pump before dispatch? |
We test the electronics and hydraulics on a test machine, including a pressure test. |
| Does the pump need coding after fitting? |
It depends on the car and the pump version – not every pump needs coding. The brake system must always be bled. |
| Will pump 13426850 fit my car? |
Compare the numbers on the label: pump 13426850 and control unit 0265956075. Application: Opel Meriva B. Matching numbers are decisive. |
