Suzuki Swift ABS Pump 62J1 BE 2WD 06.2102-0564.4 ATE
We offer a complete ABS pump with ATE electronic control module for selected Suzuki Swift versions. The unit carries the references 62J1 BE 2WD, 06.2102-0564.4, 06.2109-0812.3, RA37G10A62 and 00404116E1. Before purchasing, compare these numbers with the ABS unit originally fitted to the vehicle.
Applications for ABS pump 62J1 BE 2WD
Confirmed applications include selected Suzuki Swift 2WD versions. The exact engine version, production year and vehicle configuration should be verified using the part numbers from the original ABS unit.
- Suzuki Swift – selected 2WD versions
- body version – to be confirmed using the original ABS pump number
- engine capacity and engine code – to be verified
- production year – to be confirmed by part numbers
The safest way to identify the correct unit is to compare the references 06.2102-0564.4 and 06.2109-0812.3 with the module removed from the vehicle. Vehicle model alone is not always sufficient to select the correct ABS pump.
Common symptoms of a faulty ABS pump or control module
A fault in the ABS assembly may cause different problems depending on whether the hydraulic or electronic section is affected.
- ABS warning light illuminated on the dashboard,
- no diagnostic communication with the ABS control module,
- wheel speed sensor fault codes despite working sensors and wiring,
- incorrect ABS operation during braking,
- hydraulic pump or solenoid valve fault codes,
- intermittent loss of communication with the ABS module.
Before replacing the module, we recommend checking the power supply, grounds, wiring and ABS sensors, as similar symptoms can also be caused by faults elsewhere in the vehicle.
Programming, cloning and ABS pump preparation
The required preparation depends on the vehicle configuration and the data stored in the original control module. In some cases, coding, configuration or diagnostic procedures may be required after replacement.
- control module testing before dispatch,
- comparison of data with the customer's original module,
- data cloning – if technically required and possible for the specific version,
- coding or configuration after installation – depending on vehicle equipment,
- clearing stored fault codes and carrying out diagnostics after replacement.
To minimise compatibility problems, please send us a photo of the label on your original ABS pump before purchasing. This allows us to compare the module references with the part offered.
Frequently Asked Questions
Is ABS pump 06.2102-0564.4 compatible with a Suzuki Swift?
This reference was used in selected Suzuki Swift versions. Before purchasing, compare number 06.2102-0564.4 and the ABS control module number with the unit fitted to your vehicle.
Does ABS control module 06.2109-0812.3 require programming after installation?
This depends on the vehicle configuration. On some Suzuki Swift versions, coding, configuration or a diagnostic procedure may be required after replacement.
Can ABS module 62J1 BE 2WD replace a pump with a different part number?
The pump should not be selected by appearance alone. The numbers on the original module should match or be confirmed in advance as compatible replacements.
What do RA37G10A62 and 00404116E1 mean on the ABS module?
These are module identification references. When selecting the correct ABS pump, they should be compared together with the ATE numbers shown on the original part.
Is the ATE 62J1 ABS pump for Suzuki Swift tested before dispatch?
Yes. The offered module is tested before dispatch. We also recommend checking the vehicle wiring and other components associated with the ABS system before replacement.
