Suzuki Swift ABS Pump 73K1BE2WD 06210210394 06210952323
Original complete ATE ABS unit for Suzuki Swift, consisting of the hydraulic pump and electronic control module. The unit carries the references 73K1, 73K1BE, 73K1BE2WD, 06210210394 and 06210952323. Every unit is tested for correct operation before dispatch.
Applications for Suzuki Swift ABS pump 73K1
This ABS unit is used in selected Suzuki Swift versions, including:
- Suzuki Swift III
- Suzuki Swift IV
- Suzuki Swift 1.3 VVT 16V
- selected 2WD versions
Before purchasing, always compare the numbers on the original ABS pump and control module. The most important references are 73K1BE2WD, 06.2102-1039.4 / 06210210394 and 06.2109-5232.3 / 06210952323. Vehicle model, production year or engine capacity alone are not sufficient to confirm compatibility.
Common symptoms of a faulty ABS pump or control module
A faulty Suzuki Swift ABS module may cause symptoms such as:
- ABS or ESP warning light illuminated,
- no diagnostic communication with the ABS control module,
- wheel speed sensor fault codes despite working sensors,
- incorrect operation of the hydraulic pump,
- ABS not operating correctly during braking,
- internal ABS control module faults.
Programming and preparation of the Suzuki Swift ABS pump
The ABS pump is sold as a complete, tested hydraulic unit with electronic control module. Depending on the vehicle configuration, ABS control module coding or adaptation may be required after installation using suitable diagnostic equipment.
When replacing the module, all part numbers should match. If the vehicle requires configuration assignment or ABS/ESP calibration, the appropriate procedure should be carried out after installation according to the vehicle manufacturer's requirements.
The product is tested before dispatch and covered by a 6-month warranty.
Frequently Asked Questions – Suzuki Swift ABS 73K1BE2WD
Is ABS pump 73K1BE2WD compatible with Suzuki Swift 1.3?
The 73K1BE2WD pump is used in selected Suzuki Swift 1.3 VVT versions. Before purchasing, however, all references should be compared with the original module, especially 06210210394 and 06210952323.
|
Are 06210210394 and 06.2102-1039.4 the same ABS pump number?
Yes. 06210210394 and 06.2102-1039.4 are two formats of the same ATE reference. It is useful to check both versions when comparing parts.
|
What does number 06210952323 mean on the Suzuki Swift ABS control module?
Number 06210952323, also written as 06.2109-5232.3, is one of the main identification numbers of the ATE ABS control module. It should be compared with the number shown on the original vehicle module.
|
Does the Suzuki Swift 73K1 ABS pump require coding after installation?
Depending on the vehicle version, coding, adaptation or ABS/ESP calibration may be required. For this reason, make sure the replacement unit part numbers match the original pump before installation.
|
How can I check whether 73K1BE 2WD is suitable for my Suzuki Swift?
The most reliable method is to compare the references 73K1BE2WD, 06210210394 and 06210952323 with the numbers on the original ABS pump. Matching part numbers is more important than the production year or engine version of the Suzuki Swift.
|
