Skip to main content
English / €
Wishlist
Products in the cart: 0. See details

Your cart is empty
Open search engine
Search
Close search engine Clear Search
English / €
Products in the cart: 0. See details

Your cart is empty
Open search engine
Search
Close search engine Clear Search
  • ECU Engine A6471530079 0281010835 Mercedes E W211 2.7 CDI OM647 VIRGIN Bosch
  • 0281010835 0 281 010 835 A 647 153 00 79 ECU Engine Mercedes 2.7 CDI W203 W210 W163 OM647
Go to Product feedback

A6471530079 0281010835 VIRGIN ECU Engine controller Mercedes E W211 2.7 CDI CLEAN

BOSCH

CLEAN ECU ENGINE CONTROLLER Mercedes 2.7 CDI – full compatibility by part number A6471530079 / 0281010835

VIRGIN version (clean) – prepared for re-assignment in the vehicle using Mercedes Star Diagnosis / Xentry. The offer concerns an engine controller for Mercedes 2.7 CDI (including E-Class W211) with full compatibility exclusively by part number: A6471530079 and 0281010835.

Go to full description
Fast delivery of ECU engine unit – within 1–2 working days
English / €
with VAT without VAT
Price €259.75
incl. 23% VAT

Shipping costs are not included in the price.

Shipping from €42.50 - UPS express delivery around world (Afghanistan)

express delivery 3-6 days
pcs
Availability:
available
Ask about the product

info

Information

  • CAR MODEL Mercedes E W211
  • ENGINE 2.7 CDI
  • OEM: A6471530079 / A 6471530079 / A 647 153 00 79
  • PART NUMBER 0281010835 / 0 281 010 835
  • VARIANT VIRGIN - READY FOR PROGRAMMING
  • WARRANTY 6 MONTH
  • TESTED Second hand product
  • PAYMENT: Credit Card , Bank Transfer , PayPal
  • EXPRESS DELIVERY – in EU Countries: European Union 2-3 working days
  • INTERNATIONAL DELIVERY – Outside EU Countries: Worldwide 4-7 working days

description

A6471530079 0281010835 – VIRGIN engine control unit Mercedes 2.7 CDI OM647 (W211, W210, W203, W163)

The offered engine control unit A6471530079 / 0281010835 is a fully tested and professionally prepared VIRGIN (clean) version, ready for reprogramming in the vehicle. The module has been tested on a diagnostic bench and in a test vehicle, then reset to factory condition. The product is covered by warranty.

The most important compatibility criterion is the part number. If your control unit shows the number:
A6471530079
A 647 153 00 79
0281010835
0 281 010 835
then the control unit fits regardless of the vehicle equipment version.

Application – compatibility by part number A6471530079 / 0281010835

The control unit is used in 2.7 CDI OM647 engines (5-cylinder common rail diesel), including the following models:

  • Mercedes E-Class W211 2.7 CDI (2002–2006)
  • Mercedes E-Class W210 2.7 CDI (1999–2002)
  • Mercedes C-Class W203 2.7 CDI (2000–2005)
  • Mercedes ML W163 2.7 CDI (1999–2005)
  • Mercedes Sprinter 2.7 CDI (selected OM647 versions)

Engine code: OM647
Displacement: 2685 cm³
Injection system: Common Rail
System manufacturer: Bosch

Note: even if the vehicle model differs in production year or body version, compatibility is always confirmed by part number A6471530079 or 0281010835.

VIRGIN version – what does it mean?

The offered engine control unit is in VIRGIN (clean) version, which means:

  • reset to factory settings,
  • not assigned to any VIN number,
  • not locked by the immobiliser.

After installation, it requires programming in the vehicle using:

  • Mercedes Star Diagnosis
  • Xentry

Programming consists of:

  1. Entering the VIN number,
  2. Immobiliser adaptation (DAS/EZS),
  3. Automatic software matching to the gearbox version and equipment.

After correct coding, the control unit operates like a factory new module.

Technical condition

  • Module 100% functional
  • Tested before shipping
  • Software cleaned (VIRGIN)
  • Start-up warranty + technical warranty

FAQ – Frequently Asked Questions (A6471530079 / 0281010835)

Does engine control unit A6471530079 fit Mercedes W211 2.7 CDI from 2004?
Yes, if the number on your module is A6471530079 or 0281010835 – compatibility is complete regardless of production year within the OM647 range.

0281010835 Mercedes ML W163 2.7 CDI – does it require programming?
Yes. This is a VIRGIN version and requires coding using Star Diagnosis or Xentry.

Will 0 281 010 835 work in C-Class W203 2.7 CDI OM647?
Yes, provided the part number matches. The OM647 engine uses this type of Bosch control unit.

Mercedes E 270 CDI OM647 – A 647 153 00 79 does the immobiliser need adaptation?
Yes, during the first start it is necessary to synchronize with EZS/immobiliser using diagnostic equipment.

Can control unit 0281010835 be installed without cloning?
Yes, because this is a clean (VIRGIN) version. It does not require cloning – only standard diagnostic programming.

Why choose this control unit?

  • Full compatibility by part number
  • No VIN lock
  • Possibility of professional adaptation in service
  • Tested and verified module
  • Safe and fast shipping

If your control unit has number A6471530079 or 0281010835, this unit will be the correct replacement and, after proper programming, will restore full vehicle functionality.

Electronic Car Parts FAQ – ECUSALE

1. Are the electronic modules tested before shipping?

Yes. Every electronic module, including ECU ENGINE CONTROLLERS, ABS pumps, BSI, BCM, comfort modules, transmission controllers and other automotive electronics, is electronically tested before shipping. We verify communication, power supply and basic operation to ensure the product is working correctly before delivery. This allows you to receive a tested and ready-to-install unit.

2. Does the module require programming or coding after installation?

It depends on the product version and the type of module. We offer VIRGIN, IMMO OFF and Plug & Play solutions. Information about programming or coding requirements is always included in the product description. In many cases, installation is possible without additional coding, while some modules may require adaptation using diagnostic equipment.

3. How can I choose the correct module for my vehicle?

The most important step is comparing the part numbers from your original module. Please check the Bosch, Siemens, Magneti Marelli, Continental or OEM manufacturer numbers on the label. If you are unsure, you can send us a photo of your original module or your vehicle VIN number and we will help verify compatibility.

4. Are the products covered by warranty?

Yes. All electronic automotive modules sold in our store are covered by warranty. Every product is checked and prepared before shipping. If any problem occurs, we also provide technical support and product diagnostics assistance.

5. Which payment methods are available in your store?

We offer secure online payments through Stripe and PayPal. Customers can pay using credit or debit cards, Apple Pay, Google Pay, Klarna, online bank transfers and other secure payment methods. After placing an order, you will receive a secure online payment link.

Reviews

Number of ratings: 0
Rate and review

Blog:
enter

  • Basic Information 22-05-2026

    Audi Q7 3.0 TDI Water Damaged Engine ECU| 4L1910401D & 4L0910401G IMMO OFF Plug & Play

    Audi Q7 3.0 TDI won’t start after heavy rain? The engine ECU could be water damaged

    One of the most common failures in the Audi Q7 3.0 TDI is water damage affecting the Bosch EDC17CP04 engine ECU. This issue frequently impacts units 0281015868 and 0281014174, which are mounted beneath the windscreen scuttle panel, an area highly exposed to moisture and blocked drainage channels that can lead to corrosion inside the ECU.

    In this article, we explain the typical symptoms of a failed Audi Q7 3.0 TDI engine control unit, when ECU cloning is still possible, and why in many situations an IMMO OFF Plug & Play solution is the fastest and most reliable repair option.

    0281015868 & 0281014174 – common ECU failures in the Audi Q7 3.0 TDI

    Learn why engine ECUs such as 4L1910401D and 4L0910401G are especially vulnerable to water ingress, which fault codes usually appear during diagnostics, and how professional ECU repair or replacement is performed for the Audi Q7 3.0 TDI.

    Read more
  • Basic Information 13-05-2026

    Water-Damaged Bosch 0281013691 / 4L0910401K ECU – Common Audi Q7 3.0 TDI Engine Control Unit Failure

    Water Damage in Bosch 0281013691 / 4L0910401K ECU – A Common Audi Q7 3.0 TDI Failure

    The Bosch 0281013691 / 4L0910401K engine control unit fitted to the Audi Q7 3.0 TDI 4L is well known for being vulnerable to water damage. In many cases, the issue is caused by the ECU’s location beneath the windshield cowl, where moisture and rainwater can accumulate over time due to blocked drainage channels.

    Symptoms of a failing ECU may appear gradually or occur suddenly after heavy rain, a car wash, or long periods of vehicle inactivity. Common signs include no communication with the engine control module, intermittent or complete no-start conditions, CAN bus communication faults, and in severe cases, a completely dead ECU in the Audi Q7 3.0 TDI.

    Similar problems frequently affect other Bosch EDC16CP34 units installed in the same location, including 0281012772 / 4L0907401, 0281012919 / 4L0907401, 0281013689 / 4L0910401M, and 0281013690 / 4L0910401L. These engine control units share nearly identical hardware architecture, with the main differences relating to software versions and vehicle-specific configuration used across different Audi Q7 3.0 TDI variants.

    In this article, we explain the most common failure symptoms of the 0281013691 / 4L0910401K ECU, the typical causes of water intrusion, CAN communication issues, and a practical solution in the form of a ready-to-install IMMO OFF Plug & Play engine ECU that works without immobilizer programming or data cloning.

    Read more
    Płatności Shoper