ECU VIRGIN 12249823 FDMR – Delphi MT35E engine control unit for OPEL Meriva A 1.6 16V without PIN code
The 12249823 FDMR engine ECU, based on the Delphi MT35E platform, has been prepared in VIRGIN mode. This means the CAR PASS has been cleared and no PIN code is required. The module is ready to be assigned as new – it contains no VIN or immobilizer data.
Compatible with OPEL Meriva A petrol cars with the 1.6 16V engine, produced between 2003–2009. To activate the ECU, the programming procedure must be performed using TECH-2 or OP-COM.
The product has been thoroughly verified in workshop conditions – tested both on a diagnostic bench and in a reference vehicle. The unit is fully functional and ready for installation and configuration.
FAQ – ECU 12249823 FDMR Delphi MT35E OPEL Meriva A
Will this ECU 12249823 FDMR fit my Meriva A 1.6 16V?
Yes, this engine control unit is dedicated to the Opel Meriva A 1.6 16V from 2003–2009. If your car has this engine and the part numbers match, it will be fully compatible.
Do I need a PIN code or Car Pass to use this ECU?
No – since the ECU has been prepared in VIRGIN mode, all Car Pass data has been erased. No PIN code is required; the ECU is assigned as a new module.
How do I activate and program this ECU?
To activate the 12249823 FDMR Delphi MT35E, you need to use a diagnostic tool such as Tech-2 or OP-COM. During the process, the ECU learns the immobilizer and stores the vehicle VIN.
What does VIRGIN mode mean?
VIRGIN means the ECU behaves like a factory-new unit – with no VIN, PIN, or immobilizer data stored. This allows it to be easily assigned to another vehicle without extra operations.
Has this ECU been tested before sale?
Yes. Each ECU undergoes full workshop testing – on a diagnostic bench and in a reference vehicle. You can be sure the unit is 100% functional and ready to install.
