9676782980 V29010314A – how to choose the right ECU
We offer a used Valeo V34.1 ECU intended for Peugeot and Citroën with a petrol engine. The unit is checked before it is sent.
How to check compatibility
The most reliable way is to compare labels. Your ECU should show the numbers 9676782980, V29010314A. This unit was used in selected versions of Peugeot and Citroën with a petrol engine, but the number decides compatibility, not the model or year. If in doubt, send us a photo of the label.
Valeo V34.1 label numbers
These are the numbers that matter when matching the ECU:
- PSA number: 9676782980
- Valeo number: V29010314A
- ECU type: Valeo V34.1
Before fitting
The immobiliser in this ECU is disabled, so it is fitted without programming (plug & play).
- cloning of data from your ECU – free, once you send it to us,
- warranty – 6 months.
When you may need ECU 9676782980
A faulty ECU can show up as: no start and no injector control, no communication in diagnostics, no power to the ECU with good fuses, or a failure after water ingress or a short circuit. The same symptoms are sometimes caused by wiring, power supply or a sensor – run a diagnosis first.
Other part numbers are in the Peugeot and Citroën categories, and Valeo units are on the manufacturer page.
Common questions about ECU 9676782980
Is cloning charged?
No, cloning is free. Send us your ECU and we will transfer the data from it.
|
Is the ECU new?
No, it is a used ECU, tested before dispatch.
|
How can I check that 9676782980 will fit?
Look at the label on your ECU. It must show the numbers 9676782980, V29010314A – the car model and year are not enough.
|
How do I know the ECU is faulty?
Typical symptoms are no start, no communication in diagnostics or no power to the ECU. However, wiring, power supply or sensors can cause them too, so run a diagnosis before buying.
|
