Skip to main content
English / €
Wishlist
Products in the cart: 0. See details

Your cart is empty
Open search engine
Search
Close search engine Clear Search
English / €
Products in the cart: 0. See details

Your cart is empty
Open search engine
Search
Close search engine Clear Search
  • ECU ENGINE 0281012825 A6461500278 Mercedes Vito Viano 2.2 CDI VIRGIN
  • ECU ENGINE Mercedes Vito Viano 2.2 CDI OM646 A6461500278 0281012825
Go to Product feedback

A6461500278 0281012825 VIRGIN ECU ENGINE CONTROLLER MERCEDES VITO VIANO 2.2 CDI - CLEAR

BOSCH

0281012825 A6461500278 – Engine ECU Mercedes Vito Viano 2.2 CDI VIRGIN

Engine ECU in VIRGIN version for Mercedes Vito and Viano 2.2 CDI, part numbers A6461500278 / 0281012825, intended for programming after installation.

Go to full description
Fast delivery of ECU engine unit – within 1–2 working days
English / €
with VAT without VAT
Price €613.96
incl. 23% VAT

Shipping costs are not included in the price.

Shipping from €42.50 - UPS express delivery around world (Afghanistan)

express delivery 3-6 days
pcs
Availability:
available
Ask about the product

info

Information

  • CAR MODEL MERCEDES VITO VIANO
  • ENGINE 2.2 CDI
  • OEM: 0281012825
  • PART NUMBER A6461500278 CR3.33
  • VARIANT CLEAR - ready for programming
  • WARRANTY 6 MONTH
  • TESTED Second hand product
  • PAYMENT: Credit Card , Bank Transfer , PayPal
  • EXPRESS DELIVERY – in EU Countries: European Union 2-3 working days
  • INTERNATIONAL DELIVERY – Outside EU Countries: Worldwide 4-7 working days

description

Engine Control Unit A6461500278 / 0281012825 – Mercedes Vito Viano 2.2 CDI VIRGIN

The A6461500278 engine control unit, also known under part number 0281012825, is an original control module used in Mercedes Vito and Mercedes Viano vehicles with the 2.2 CDI engine. It is responsible for precise engine management, including fuel injection control, combustion parameter monitoring, and communication with other vehicle systems.

The 0281012825 module was installed in vehicles produced between 2003–2010, equipped with the 2.2 CDI OM646 engine. This control unit was used in both commercial Mercedes Vito versions and passenger Mercedes Viano models, for passenger transport, goods transport, and special-purpose vehicles.

The offered A6461500278 engine control unit is supplied in VIRGIN (clean) condition, meaning it contains no stored vehicle data, VIN number, or immobilizer information. Thanks to this, ECU 0281012825 can be safely assigned to another vehicle; however, after installation it requires full programming and adaptation.

The adaptation process for the A6461500278 engine control unit must be performed using Mercedes Star Diagnosis or Xentry. After correct programming, the 0281012825 control unit stores the vehicle data and operates like a factory-new module.

Q&A – engine control unit A6461500278 / 0281012825

Does engine control unit 0281012825 fit Mercedes Vito 2.2 CDI?
Yes, engine control unit 0281012825 is designed for Mercedes Vito with the 2.2 CDI OM646 engine and requires programming after installation.

Which Mercedes models is control unit A6461500278 compatible with?
Engine control unit A6461500278 is used in Mercedes Vito and Mercedes Viano 2.2 CDI produced between 2003–2010.

Is ECU 0281012825 supplied in VIRGIN version?
Yes, ECU 0281012825 is available in VIRGIN (clean) version, without stored VIN or immobilizer data.

Does engine control unit A6461500278 require programming?
Yes, the A6461500278 engine control unit in VIRGIN version requires adaptation to the vehicle using Star Diagnosis or Xentry.

Will part number 0281012825 start the vehicle without coding?
No, engine control unit 0281012825 will not start the vehicle without prior programming to the specific car.

Can A6461500278 be used as a replacement for a faulty control unit?
Yes, A6461500278 can be used as a replacement, provided that programming or data cloning is performed.

Which device is required to program control unit 0281012825?
Programming of engine control unit 0281012825 requires Mercedes Star Diagnosis or Xentry.

Is control unit A6461500278 compatible with Viano 2.2 CDI?
Yes, the A6461500278 engine control unit is compatible with Mercedes Viano 2.2 CDI, as long as the part number matches the original.

Electronic Car Parts FAQ – ECUSALE

1. Are the electronic modules tested before shipping?

Yes. Every electronic module, including ECU ENGINE CONTROLLERS, ABS pumps, BSI, BCM, comfort modules, transmission controllers and other automotive electronics, is electronically tested before shipping. We verify communication, power supply and basic operation to ensure the product is working correctly before delivery. This allows you to receive a tested and ready-to-install unit.

2. Does the module require programming or coding after installation?

It depends on the product version and the type of module. We offer VIRGIN, IMMO OFF and Plug & Play solutions. Information about programming or coding requirements is always included in the product description. In many cases, installation is possible without additional coding, while some modules may require adaptation using diagnostic equipment.

3. How can I choose the correct module for my vehicle?

The most important step is comparing the part numbers from your original module. Please check the Bosch, Siemens, Magneti Marelli, Continental or OEM manufacturer numbers on the label. If you are unsure, you can send us a photo of your original module or your vehicle VIN number and we will help verify compatibility.

4. Are the products covered by warranty?

Yes. All electronic automotive modules sold in our store are covered by warranty. Every product is checked and prepared before shipping. If any problem occurs, we also provide technical support and product diagnostics assistance.

5. Which payment methods are available in your store?

We offer secure online payments through Stripe and PayPal. Customers can pay using credit or debit cards, Apple Pay, Google Pay, Klarna, online bank transfers and other secure payment methods. After placing an order, you will receive a secure online payment link.

Reviews

Number of ratings: 0
Rate and review

Similar products

    Blog:
    enter

    • Basic Information 22-05-2026

      Audi Q7 3.0 TDI Water Damaged Engine ECU| 4L1910401D & 4L0910401G IMMO OFF Plug & Play

      Audi Q7 3.0 TDI won’t start after heavy rain? The engine ECU could be water damaged

      One of the most common failures in the Audi Q7 3.0 TDI is water damage affecting the Bosch EDC17CP04 engine ECU. This issue frequently impacts units 0281015868 and 0281014174, which are mounted beneath the windscreen scuttle panel, an area highly exposed to moisture and blocked drainage channels that can lead to corrosion inside the ECU.

      In this article, we explain the typical symptoms of a failed Audi Q7 3.0 TDI engine control unit, when ECU cloning is still possible, and why in many situations an IMMO OFF Plug & Play solution is the fastest and most reliable repair option.

      0281015868 & 0281014174 – common ECU failures in the Audi Q7 3.0 TDI

      Learn why engine ECUs such as 4L1910401D and 4L0910401G are especially vulnerable to water ingress, which fault codes usually appear during diagnostics, and how professional ECU repair or replacement is performed for the Audi Q7 3.0 TDI.

      Read more
    • Basic Information 13-05-2026

      Water-Damaged Bosch 0281013691 / 4L0910401K ECU – Common Audi Q7 3.0 TDI Engine Control Unit Failure

      Water Damage in Bosch 0281013691 / 4L0910401K ECU – A Common Audi Q7 3.0 TDI Failure

      The Bosch 0281013691 / 4L0910401K engine control unit fitted to the Audi Q7 3.0 TDI 4L is well known for being vulnerable to water damage. In many cases, the issue is caused by the ECU’s location beneath the windshield cowl, where moisture and rainwater can accumulate over time due to blocked drainage channels.

      Symptoms of a failing ECU may appear gradually or occur suddenly after heavy rain, a car wash, or long periods of vehicle inactivity. Common signs include no communication with the engine control module, intermittent or complete no-start conditions, CAN bus communication faults, and in severe cases, a completely dead ECU in the Audi Q7 3.0 TDI.

      Similar problems frequently affect other Bosch EDC16CP34 units installed in the same location, including 0281012772 / 4L0907401, 0281012919 / 4L0907401, 0281013689 / 4L0910401M, and 0281013690 / 4L0910401L. These engine control units share nearly identical hardware architecture, with the main differences relating to software versions and vehicle-specific configuration used across different Audi Q7 3.0 TDI variants.

      In this article, we explain the most common failure symptoms of the 0281013691 / 4L0910401K ECU, the typical causes of water intrusion, CAN communication issues, and a practical solution in the form of a ready-to-install IMMO OFF Plug & Play engine ECU that works without immobilizer programming or data cloning.

      Read more
      Płatności Shoper