What to know about ECU 0261201610 9664255780
On this page you can buy a Bosch ME7.4.5 engine control unit for Peugeot and Citroën with a petrol engine. The ECU is used and tested before dispatch.
What you get
- IMMO OFF plug & play version – no programming and no immobiliser pairing after fitting.
- Free cloning of data from your ECU (once you send it to us).
- Warranty: 6 months.
ECU 0261201610 numbers
The label of this unit shows:
- Bosch number: 0261201610
- PSA number: 9664255780
- ECU type: Bosch ME7.4.5
How to check compatibility
The most reliable way is to compare labels. Your ECU should show the numbers 0261201610, 9664255780. This unit was used in selected versions of Peugeot and Citroën with a petrol engine, but the number decides compatibility, not the model or year. If in doubt, send us a photo of the label.
When you may need ECU 0261201610
A faulty ECU can show up as: no start and no injector control, no communication in diagnostics, no power to the ECU with good fuses, or a failure after water ingress or a short circuit. The same symptoms are sometimes caused by wiring, power supply or a sensor – run a diagnosis first.
More units in the Peugeot and Citroën categories and on the Bosch manufacturer page.
FAQ – ECU 0261201610 (Bosch ME7.4.5)
Is the ECU new?
No, it is a used ECU, tested before dispatch.
|
Is cloning charged?
No, cloning is free. Send us your ECU and we will transfer the data from it.
|
How do I know the ECU is faulty?
Typical symptoms are no start, no communication in diagnostics or no power to the ECU. However, wiring, power supply or sensors can cause them too, so run a diagnosis before buying.
|
How can I check that 0261201610 will fit?
Look at the label on your ECU. It must show the numbers 0261201610, 9664255780 – the car model and year are not enough.
|
