Engine control unit 0261208905 9663518980 (Bosch ME7.4.5)
Used Bosch ME7.4.5 module for Peugeot and Citroën with a petrol engine – we check it before dispatch.
Failure symptoms – what to look for
- the car will not start, the injectors are not controlled,
- the diagnostic tester cannot connect to the ECU,
- the fuses are fine, but the ECU has no power,
- the problem appeared after water ingress or a wiring short circuit.
The cause can also be wiring, power supply or sensors. Before you buy an ECU, have the car diagnosed.
How to check compatibility
The most reliable way is to compare labels. Your ECU should show the numbers 0261208905, 9663518980, 9652552380. This unit was used in selected versions of Peugeot and Citroën with a petrol engine, but the number decides compatibility, not the model or year. If in doubt, send us a photo of the label.
Fitting without programming
ECU 0261208905 has its immobiliser disabled (IMMO OFF). Once connected in the car, it does not need programming or pairing with the immobiliser. Want to transfer the data from your old ECU? Send it to us – cloning is free. The warranty is 6 months.
ECU 0261208905 numbers
The label of this unit shows:
- Bosch number: 0261208905
- PSA number: 9663518980
- Additional number: 9652552380
- ECU type: Bosch ME7.4.5
Other part numbers are in the Peugeot and Citroën categories, and Bosch units are on the manufacturer page.
FAQ – ECU 0261208905 (Bosch ME7.4.5)
Can you transfer the data from my ECU to 0261208905?
Yes, free of charge. Just send us your current ECU.
|
Does ECU 0261208905 need programming?
No. It is an IMMO OFF plug & play version: the immobiliser is disabled, so no programming is needed after fitting.
|
Is 0261208905 a new ECU?
No. We sell a used unit that is tested before dispatch.
|
How can I check that 0261208905 will fit?
Look at the label on your ECU. It must show the numbers 0261208905, 9663518980, 9652552380 – the car model and year are not enough.
|
