ECU 98002896 ED – description
We offer a Denso MB275800-4764 ECU intended for the Opel Meriva with the 1.7 CDTI engine. The unit has been refreshed and the housing refurbished – the electronics have never been repaired. The Car Pass (PIN) code is reset (Virgin), so the ECU is waiting to be programmed in the car.
Matching by part number
- Application: the Opel Meriva with the 1.7 CDTI engine.
- Number to compare: 98002896 ED (98002896ED).
- Model and year do not decide compatibility – the label does.
ECU 98002896 ED numbers
The label of this unit shows:
- Opel / GM number: 98002896
- Letter code: ED (98002896ED)
- Denso number: MB275800-4764
- ECU type: Denso 1.7 CDTI
Before fitting
Virgin means the Car Pass (PIN) code is reset – after fitting, the ECU is programmed in the car with Tech-2 or OP-COM.
- data cloning (the EEPROM and FLASH files or the whole ECU) – included in the price, we return both units,
- EGR OFF, tuning, DPF OFF (on versions with a DPF) – for an extra charge,
- warranty – 6 months.
Typical failure symptoms
- starting problems,
- injector control faults,
- uneven running and misfires.
The cause is usually the mounting position – the left front wheel arch next to the bumper, close to the ground, where rain, road spray and snow damage the ECU. Run a diagnosis before buying.
See other Denso 1.7 CDTI numbers
Read more on our blog: Opel 1.7 CDTI Denso ECUs – Astra H, Zafira, Corsa. Looking for a number other than 98002896 ED? Browse the Opel engine ECUs category or the Denso manufacturer page.
FAQ – ECU 98002896 ED (Denso MB275800-4764)
Is ECU 98002896 ED reset?
Yes, it is a Virgin version with the Car Pass (PIN) code reset, ready for programming in the car.
|
Where is the ECU on an Opel 1.7 CDTI?
In the left front wheel arch next to the bumper, close to the ground – which is why it is exposed to rain, road spray and snow.
|
How do I check that 98002896 ED fits my Opel Meriva?
Look at the label on your ECU – it must show the number 98002896 ED (98002896ED). The model and year alone are not enough.
|
What do I program ECU 98002896 ED with?
With Tech-2 or OP-COM, after fitting it in the car. The Car Pass (PIN) code is reset.
|
