9892052280 – original Magneti Marelli control unit
Original, used Magneti Marelli control unit for the 6-speed MCP automated manual gearbox. The key numbers to compare are 9892052280 and CFC410P.01. Every unit is bench-tested before shipping.
Which cars does 9892052280 fit?
We have confirmed this number in: Peugeot Partner II 1.6 BlueHDi (MCP). This is not a complete list – if your car is not on it, the unit may still fit, and a listed model does not guarantee compatibility. The label decides: numbers 9892052280 and CFC410P.01 must match your unit. A different letter at the end of the number means a different version.
See also
Other versions of this type of control unit (always choose by the label number): 9664870880 / BC0091807H, 9679083080 / BC0103586I, 9664139780 / BC0091807E, 9675305480 / BC0107299A, 9678905780 / BC0101511F.
How does a gearbox control unit fault show?
A faulty gearbox control unit can cause these symptoms:
- the gearbox will not engage a gear or stays in neutral (N),
- jerking when pulling away or changing gear,
- the gearbox goes into limp mode,
- no communication with the gearbox control unit in diagnostics.
Similar symptoms can be caused by the clutch or gear-shift actuator, so a gearbox diagnosis before buying is worthwhile.
Fitting
The control unit does not need programming. Compare the numbers with the label of your unit before ordering. With the same numbers, the unit works after plugging in, without coding.
Numbers to compare with your unit
| Label | Number (different formats) |
|---|
| PSA number | 9892052280 / 98 920 522 80 |
| Magneti Marelli code | CFC410P.01 / CFC410P01 |
Contact and warranty
Not sure whether the number matches? Contact us. The control unit has a warranty – 6 months. Other control units: Peugeot Transmission Control Units (TCU) / Citroën Transmission Control Units (TCU).
Questions and answers: 9892052280
| Question |
Answer |
| How do I check whether the unit fits my car? |
Compare numbers 9892052280 and CFC410P.01 with the label of your unit – they must match, including the letter at the end. |
| Is this an automatic gearbox control unit? |
It controls an automated manual gearbox: a conventional gearbox with a clutch, where gear changes and the clutch are operated by electronically controlled actuators. It is not a torque-converter automatic. |
| Which cars use 9892052280? |
We have confirmed it in: Peugeot Partner II 1.6 BlueHDi (MCP). The label number still decides. |
| Does the control unit need programming? |
No, the control unit does not need programming. With the same numbers, the unit works after plugging in, without coding. |
