Engine Control Unit A1351502379 1860A372 E6T42487 H4ZE for Smart ForFour 1.3 2005 – tested and ready for programming
The offered engine control unit A1351502379 / 1860A372 / E6T42487 / H4ZE is an original module designed for Smart ForFour I vehicles with a 1.3 petrol engine. Each unit is fully checked, tested and covered by warranty.
Which vehicles is the engine control unit A1351502379 1860A372 compatible with?
This engine control unit is used in the following model:
- Smart ForFour I
- production years: 2004–2006
- engine: 1.3 petrol
- example year from the offer: 2005
Note: compatibility should always be confirmed by the part number from the label, not only by the vehicle model, engine capacity or production year. Different electronic versions could be used within the same model, therefore the safest selection method is to compare the markings A1351502379 and 1860A372 with the original unit installed in the vehicle.
Engine control unit part numbers
- Manufacturer code: A1351502379
- OEM code: 1860A372
- Additional markings: 1860A372, E6T42487, H4ZE
If you are looking for an engine control unit by the number A1351502379, 1860A372 or E6T42487, this offer has been prepared specifically for searching by a specific part number. This is the best way to select the correct module for Smart ForFour 1.3 without the risk of mismatch.
Condition and preparation of the unit
The offered engine control unit is fully tested before shipping. The module undergoes technical inspection, ensuring that the buyer receives a part ready for installation and further programming in the vehicle. The product is covered by a warranty.
This is a solution for those who need to replace a faulty engine control unit in a Smart ForFour I 1.3 and are looking for the correct part based on the original markings from the module housing.
Does the engine control unit A1351502379 require programming?
Yes, this unit requires programming / adaptation to the vehicle. After installation, it is necessary to assign it to the immobilizer and vehicle configuration using an appropriate diagnostic device. Matching the part number is crucial when purchasing, but proper programming is also required to start the vehicle.
Programming is performed using diagnostic equipment supporting the brand and control system. In practice, professional workshop testers are used, enabling:
- engine control unit identification,
- module adaptation to the vehicle,
- immobilizer programming,
- coding after installation.
FAQ – frequently asked questions
Does the engine control unit A1351502379 fit Smart ForFour 1.3?
Yes, if your vehicle originally has an engine control unit with the number A1351502379 or a matching designation 1860A372 / E6T42487. The most important factor is compatibility by part number from the label.
Which vehicle is the 1860A372 unit compatible with?
The 1860A372 engine control unit is used in Smart ForFour I 1.3. Before purchase, the number must be compared with the original module installed in the vehicle.
Will ECU E6T42487 work in a 2005 Smart ForFour?
Yes, if the part number E6T42487 matches the original unit from the vehicle. The year 2005 alone is not sufficient – the number on the label is decisive.
Does the 1860A372 engine control unit require programming after installation?
Yes, this model requires programming and adaptation to the vehicle. After installation, a diagnostic procedure must be carried out using the appropriate tester.
How to program the engine control unit A1351502379 in Smart ForFour?
The unit should be installed in the vehicle, a professional diagnostic tester connected, and then adaptation and programming performed according to the procedure for the specific vehicle. Usually, a PIN or access data is also required.
Does 1860A372 fit only Smart ForFour or also other models?
The selection should always be based on the part number from the label. If you are looking for compatibility, do not rely only on a similar engine or brand, but on an identical unit number.
Where is the engine control unit number located in Smart ForFour 1.3?
The engine control unit number is located on the label placed on the module housing. The markings A1351502379, 1860A372, E6T42487 or H4ZE should be read from it.
Can a used engine control unit for Smart ForFour be functional and ready for installation?
Yes, provided that it has been tested beforehand. The offered unit is fully tested and covered by a warranty.
Which ECU to buy for Smart ForFour 1.3 2004–2006?
You should buy exactly the same engine control unit that was originally installed in the vehicle, i.e. matching by part number. In this offer, the key markings are A1351502379 and 1860A372.
