Mercedes A 646 150 63 72 – Bosch ECU for the Sprinter 2.2 CDI
We sell a used Bosch 0281015053 ECU with Mercedes-Benz number A 646 150 63 72, for the 2.2 CDI OM646 engine in the Sprinter W906. The unit has been reset – clean (Virgin), with no data from the previous vehicle. 10 units in stock.
Label data
| Mercedes-Benz number | A 646 150 63 72 (A6461506372) |
| Bosch number | 0 281 015 053 (0281015053) |
| Platform | CR4.20 (Bosch EDC16CP31) |
| Hardware / software | HW 31.06 / SW 24.07 |
| Other markings | ED6106 CR4.20 ZGS000 FD 07M11, 1304 1712, 07-11-30 |
Two ways to get it running
Programming: this ECU is not Plug & Play – after fitting it must be coded to the vehicle with Xentry or Star Diagnosis (dealer or a workshop with that equipment).
Clone included: send us your old module or its files and we transfer the data to unit 0281015053 – then you fit it without programming.
Optional for a fee: EGR OFF or DPF OFF (DPF OFF only on vehicles with a filter).
Neighbouring numbers – do not mix them up
For the Sprinter W906 we also stock A6461506472 / 0281015054 and A6461506572 / 0281015055. They run different software, so order the full set of numbers from your ECU label. When the numbers match, the ECU also fits Sprinter versions not listed here. All modules: Mercedes-Benz engine ECU category.
A6461506372 / 0281015053 – questions
Is this ECU Plug & Play?
No. It is a clean Virgin unit – it must be programmed with Xentry or Star Diagnosis, or you can order a clone, which we do at no extra cost.
|
What is needed for cloning?
Your old ECU or files read from it. We use them to transfer the data to the new unit.
|
How does it differ from 0281015054?
It is a different Bosch number and a different Mercedes number (A6461506472), so different software. Order the one whose numbers are on your label.
|