D1B1-2C405-AE / D1B1-2C013-BC – what the set includes
We sell the whole ATE ABS module for Ford Fiesta Mk7 / B-Max, not just the pump: the hydraulic block and the ABS control unit form one unit. The label numbers are D1B1-2C405-AE (pump) and D1B1-2C013-BC (control unit).
This is a used unit. In our workshop we test it on a machine: electronics, hydraulics and pressure.
Fitting and coding
After fitting, the brake system must be bled. Whether coding or adaptation with a diagnostic tool is needed depends on the car and the pump type – not every pump requires it.
Vehicle compatibility
Confirmed application: Ford Fiesta Mk7 / B-Max. The car model alone is not enough – compare the pump and control unit numbers with the label on your module.
Similar ABS pumps
Same car model, different pump and module numbers – the number on your pump label decides which one fits: D1B1-2C405-AC / D1B1-2C013-BA.
Typical ABS module faults
A faulty pump or control unit can show up as:
- ABS and/or ESP light on,
- fault codes for the pump motor, valves or ABS control unit supply,
- no communication with the ABS module in diagnostics,
- weaker braking or one wheel locking.
However, the ABS light is often caused by a wheel speed sensor, the ABS ring or the wiring rather than the pump itself. Run diagnostics before buying and see our guide ABS pump failure – symptoms and refurbishment.
Numbers to compare
| Marking | Number (different formats) |
|---|
| Pump number (OEM) | D1B1-2C405-AE / D1B12C405AE |
| ABS control unit (OEM) | D1B1-2C013-BC / D1B12C013BC |
| ATE number | 10.0915-0108.3 / 10091501083 |
Each number is shown in several formats, because that is how it is printed on labels and typed into search engines.
Warranty and other pumps
The warranty is 6 months. Other ABS pumps are in the Ford ABS Pumps category. If you are unsure about compatibility, send a photo of the label – we will compare the numbers.
Questions about ABS pump D1B1-2C405-AE
| Question |
Answer |
| The ABS light is on – is it definitely the pump? |
Not necessarily. A wheel speed sensor, the ABS ring or the wiring is often to blame, so run diagnostics before buying. |
| Is pump D1B1-2C405-AE tested? |
Yes. It is a used unit tested on a machine – electronics, hydraulics and a pressure test. |
| What is the warranty on pump D1B1-2C405-AE? |
The warranty is 6 months. |
| Does pump D1B1-2C405-AE need adaptation with a tester? |
Not always – it depends on the car and the pump version. Bleeding the brake system is necessary in every case. |
| Will pump D1B1-2C405-AE fit my car? |
Compare the numbers on the label: pump D1B1-2C405-AE and control unit D1B1-2C013-BC. Application: Ford Fiesta Mk7 / B-Max. Matching numbers are decisive. |
