Skip to main content
English €
Open search engine
Search
Close search engine Clear Search
Products in the cart: 0. See details
Your cart is empty

Visteon

Automotive Electronics Manufacturers

ECU Engine Controllers, ABS Pumps, BCM Modules and automotive electronics.

Products: 12

List of products

Product name: Z to A Default Product name: A to Z Product name: Z to A Price: from lowest Price: from highest

Visteon – engine control units for Fiat Ducato, Peugeot Boxer and Citroën Jumper 2.2

Visteon is a manufacturer of automotive electronics. At ECUSale you will find used Visteon engine control units for the Fiat Ducato, Peugeot Boxer and Citroën Jumper vans with the 2.2 HDi / 2.2 Multijet engine. The units are Virgin versions – they code themselves to the car after fitting – and every unit is tested in a car before dispatch.

Virgin plug & play – plug in and drive

  • No programming: after fitting, the ECU codes itself to the car and immobiliser. No programming and no injector coding are needed. Condition: matching label number.
  • IMMO OFF on request: the immobiliser warning light usually does not come on. In some versions with an advanced instrument cluster it may light up.
  • Cloning – free, included in the price: send us your ECU and we will transfer the data.
  • EGR OFF and tuning – paid extras, on request.

Visteon ECUs in stock – match by number

What matters most is the number on the label of your ECU. Visteon ECUs for the Ducato, Boxer and Jumper 2.2 carry an ECU number and a hardware (HW) number:

Possible symptoms of a faulty ECU

  • the engine does not start,
  • no communication with the ECU in diagnostics,
  • no injector control,
  • fault after water ingress or a short circuit in the wiring.

These symptoms can also have other causes – wiring, power supply or sensors. Run a diagnosis before buying.

Why a Visteon ECU from ECUSale

  • used ECU tested in a car,
  • Virgin version – codes itself to the car, no programming,
  • IMMO OFF on request, free cloning,
  • help choosing by the label number,
  • 6-month warranty.

Frequently asked questions about Visteon ECUs

Does a Visteon ECU need programming after fitting?

No. The Virgin version codes itself to the car and immobiliser after fitting – no programming and no injector coding are needed.

Can I order an IMMO OFF version?

Yes, on request. The immobiliser warning light usually does not come on, but in some versions with an advanced instrument cluster it may light up.

How do I choose the right Visteon ECU for my vehicle?

Compare the ECU number and the hardware (HW) number on the label of your ECU. If in doubt, send us a photo of the label.

Can I have my ECU cloned?

Yes, cloning is free and included in the price – just send us your ECU.

Do you offer EGR OFF and tuning?

Yes, on request at extra cost.