Skip to main content
English / €
Wishlist
Products in the cart: 0. See details

Your cart is empty
Open search engine
Search
Close search engine Clear Search
English / €
Products in the cart: 0. See details

Your cart is empty
Open search engine
Search
Close search engine Clear Search
Go to Product feedback

9665066380 Plug & Play ECU Engine Controller Visteon Fiat Ducato Peugeot Boxer Citroën Jumper 2.2 JTD 9661256980

Visteon

ECU Engine Controller 9665066380 9661256980 – Fiat Ducato Boxer Jumper 2.2 HDi JTD Plug & Play

Original 9665066380 module prepared in VIRGIN Plug & Play version – ready for installation and capable of automatic adaptation to the vehicle without cloning or additional programming.

Go to full description
Fast delivery of ECU engine unit – within 1–2 working days
English / €
with VAT without VAT
Price €590.35
incl. 23% VAT

Shipping costs are not included in the price.

Shipping from €42.50 - UPS express delivery around world (Afghanistan)

express delivery 3-6 days

You can choose an additional variant

Individual variants may differ in price

pcs
Availability:
available
Ask about the product

info

Information

  • CAR MODEL FIAT DUCATO CITROEN JUMPER PEUGEOT BOXER
  • ENGINE 2.2
  • OEM: 9665066380
  • PART NUMBER 9661256980
  • PLUG AND PLAY VIRGIN
  • WARRANTY 6 MONTH
  • TESTED Second hand product
  • PAYMENT: Credit Card , Bank Transfer , PayPal
  • EXPRESS DELIVERY – in EU Countries: European Union 2-3 working days
  • INTERNATIONAL DELIVERY – Outside EU Countries: Worldwide 4-7 working days

description

9665066380 / 9661256980 – ECU ENGINE CONTROLLER for Fiat Ducato, Peugeot Boxer and Citroën Jumper 2.2 HDi / JTD

Original Visteon ECU ENGINE CONTROLLER 9665066380 / 9661256980 used in Fiat Ducato, Peugeot Boxer and Citroën Jumper vehicles equipped with 2.2 HDi / 2.2 JTD diesel engines. This ECU was mainly installed in vehicles produced between 2006 and 2014, including vans, motorhomes and commercial fleet vehicles.

The controller is supplied in VIRGIN Plug & Play condition, allowing automatic synchronization with the immobiliser system after installation without the need to clone the old ECU or perform additional coding.

Each unit is fully tested for electronic performance and diagnostic communication before shipping. The ECU is ready for installation and compatible according to part numbers 9665066380 and 9661256980.

Compatibility of ECU 9665066380 / 9661256980

The ECU is compatible with selected models:

  • Fiat Ducato 2.2 JTD – model years approx. 2006–2014
  • Peugeot Boxer 2.2 HDi – model years approx. 2006–2014
  • Citroën Jumper 2.2 HDi – model years approx. 2006–2014

The most important compatibility criterion is the matching part number displayed on the ECU label. If you are unsure, we recommend sending a photo of your original controller before purchase.

Common failures of ECU 9665066380

A faulty engine ECU can cause various engine management and diagnostic communication problems. Common symptoms include:

  • electronic damage caused by moisture, short circuits or voltage surges,
  • no communication with the ECU during diagnostics,
  • random CAN bus and module communication faults,
  • engine stalling while driving,
  • starting issues or fuel injection malfunctions.

In many cases, failures occur after water ingress in the engine bay, damaged wiring harnesses or unstable power supply to the ECU.

FAQ – ECU ENGINE CONTROLLER 9665066380 / 9661256980

Question: Which vehicles use ECU 9665066380?
Answer: The ECU is compatible with Fiat Ducato, Peugeot Boxer and Citroën Jumper models fitted with the 2.2 HDi / JTD engine. Matching the part number on the ECU label is essential.

Question: Is ECU 9665066380 ready for installation?
Answer: Yes, the controller is delivered in VIRGIN Plug & Play condition, ready for installation.

Question: Does the ECU require coding after installation?
Answer: In most cases, cloning or manual immobiliser coding is not required.

Question: What are the symptoms of a faulty 9661256980 ECU?
Answer: The most common symptoms are diagnostic communication failure, starting problems, CAN communication faults or engine stalling while driving.

Question: Is the ECU tested before shipping?
Answer: Yes, every ECU is electronically tested and checked before dispatch.

Electronic Car Parts FAQ – ECUSALE

1. Are the electronic modules tested before shipping?

Yes. Every electronic module, including ECU ENGINE CONTROLLERS, ABS pumps, BSI, BCM, comfort modules, transmission controllers and other automotive electronics, is electronically tested before shipping. We verify communication, power supply and basic operation to ensure the product is working correctly before delivery. This allows you to receive a tested and ready-to-install unit.

2. Does the module require programming or coding after installation?

It depends on the product version and the type of module. We offer VIRGIN, IMMO OFF and Plug & Play solutions. Information about programming or coding requirements is always included in the product description. In many cases, installation is possible without additional coding, while some modules may require adaptation using diagnostic equipment.

3. How can I choose the correct module for my vehicle?

The most important step is comparing the part numbers from your original module. Please check the Bosch, Siemens, Magneti Marelli, Continental or OEM manufacturer numbers on the label. If you are unsure, you can send us a photo of your original module or your vehicle VIN number and we will help verify compatibility.

4. Are the products covered by warranty?

Yes. All electronic automotive modules sold in our store are covered by warranty. Every product is checked and prepared before shipping. If any problem occurs, we also provide technical support and product diagnostics assistance.

5. Which payment methods are available in your store?

We offer secure online payments through Stripe and PayPal. Customers can pay using credit or debit cards, Apple Pay, Google Pay, Klarna, online bank transfers and other secure payment methods. After placing an order, you will receive a secure online payment link.

Reviews

Number of ratings: 0
Rate and review

Similar products

    Blog:
    enter

    • Basic Information 22-05-2026

      Audi Q7 3.0 TDI Water Damaged Engine ECU| 4L1910401D & 4L0910401G IMMO OFF Plug & Play

      Audi Q7 3.0 TDI won’t start after heavy rain? The engine ECU could be water damaged

      One of the most common failures in the Audi Q7 3.0 TDI is water damage affecting the Bosch EDC17CP04 engine ECU. This issue frequently impacts units 0281015868 and 0281014174, which are mounted beneath the windscreen scuttle panel, an area highly exposed to moisture and blocked drainage channels that can lead to corrosion inside the ECU.

      In this article, we explain the typical symptoms of a failed Audi Q7 3.0 TDI engine control unit, when ECU cloning is still possible, and why in many situations an IMMO OFF Plug & Play solution is the fastest and most reliable repair option.

      0281015868 & 0281014174 – common ECU failures in the Audi Q7 3.0 TDI

      Learn why engine ECUs such as 4L1910401D and 4L0910401G are especially vulnerable to water ingress, which fault codes usually appear during diagnostics, and how professional ECU repair or replacement is performed for the Audi Q7 3.0 TDI.

      Read more
    • Basic Information 13-05-2026

      Water-Damaged Bosch 0281013691 / 4L0910401K ECU – Common Audi Q7 3.0 TDI Engine Control Unit Failure

      Water Damage in Bosch 0281013691 / 4L0910401K ECU – A Common Audi Q7 3.0 TDI Failure

      The Bosch 0281013691 / 4L0910401K engine control unit fitted to the Audi Q7 3.0 TDI 4L is well known for being vulnerable to water damage. In many cases, the issue is caused by the ECU’s location beneath the windshield cowl, where moisture and rainwater can accumulate over time due to blocked drainage channels.

      Symptoms of a failing ECU may appear gradually or occur suddenly after heavy rain, a car wash, or long periods of vehicle inactivity. Common signs include no communication with the engine control module, intermittent or complete no-start conditions, CAN bus communication faults, and in severe cases, a completely dead ECU in the Audi Q7 3.0 TDI.

      Similar problems frequently affect other Bosch EDC16CP34 units installed in the same location, including 0281012772 / 4L0907401, 0281012919 / 4L0907401, 0281013689 / 4L0910401M, and 0281013690 / 4L0910401L. These engine control units share nearly identical hardware architecture, with the main differences relating to software versions and vehicle-specific configuration used across different Audi Q7 3.0 TDI variants.

      In this article, we explain the most common failure symptoms of the 0281013691 / 4L0910401K ECU, the typical causes of water intrusion, CAN communication issues, and a practical solution in the form of a ready-to-install IMMO OFF Plug & Play engine ECU that works without immobilizer programming or data cloning.

      Read more
      Płatności Shoper