Fiat 500 1.0 Hybrid – what the MOPAR label says
The first label line reads “500 1.0L GSE/BSG N3 EMEA”: a Fiat 500 with the three-cylinder 1.0 GSE (FireFly) engine and a BSG belt starter-generator, i.e. a mild hybrid. The module was made by Magneti Marelli and numbered by MOPAR. Its immobiliser memory is cleared (Virgin); 10 units in stock.
Numbers to order by
52204376 – MOPAR part number
11GFD7/HW142/S580-CBDR – type and software (11GFD7)
BC.0204464.A – Magneti Marelli number
Other codes: D419, LF14, TD4191651H51960
Other ECUs for the 500 1.0 Hybrid
We also stock modules 52191346 and 52177151 – different numbers and different software. Order the one whose number is on your old ECU. If the number matches, the ECU fits even if your car version is not mentioned; the name “500 Hybrid” alone is not enough. More: Fiat engine ECU category.
Fitting
Plug the ECU in place of the old one and switch on the ignition – the module programs itself to the immobiliser. You need a matching number and a working immobiliser.
500 Hybrid 52204376 – questions
The label says MOPAR, not FPT – is it genuine?
Yes. MOPAR is the parts brand of the Stellantis group, and the ECU itself was made by Magneti Marelli – the name is cast into the housing.
|
Does it fit the Panda 1.0 Hybrid?
This unit’s label points to the Fiat 500. In another car the number decides: if your old ECU shows 52204376, you can order it.
|
Does anything need adapting after fitting?
The Virgin version programs itself to the immobiliser and the car. If you prefer a clone, send us your old ECU – we transfer the data at no extra cost.
|