ECU ENGINE CONTROLLER SAAB 9-3 1.9 TTiD 55577896 0281017592 BOSCH VIRGIN – ready for programming
The offered ECU ENGINE CONTROLLER 55577896 / 0281017592 by BOSCH is an original module used in selected versions of SAAB 9-3 1.9 TTiD. The unit is fully tested, verified and prepared as VIRGIN, meaning it is in a clean state – without any data from a previous vehicle.
VIRGIN = clean – requires programming. This means that after installation, the ECU must be assigned and programmed to the vehicle using appropriate diagnostic equipment. This solution is intended for users who need a correctly matched part number module prepared for further adaptation in the car.
Compatibility – which models does ECU 55577896 0281017592 fit?
The ECU ENGINE CONTROLLER 55577896 and 0281017592 is most commonly found in vehicles:
- SAAB 9-3 II
- SAAB 9-3 Sport Sedan / SportCombi / Cabrio
- engine 1.9 TTiD
- engine capacity 1910 cm3
- engine code commonly associated: A19DTR
- approximate production years: 2008–2011 / 2012
Key matching rule: compatibility should be confirmed primarily by part numbers 55577896 and Bosch 0281017592. In automotive electronics, the number on the ECU label is the most important factor.
Why choose ECU 0281017592 55577896 in VIRGIN version?
Purchasing a SAAB ECU 55577896 in VIRGIN version allows the module to be prepared for operation in a new vehicle. The ECU is clean and ready for programming and adaptation. This is a good solution when the original unit is damaged, has communication issues or requires replacement with an identical part number.
The offered unit is tested before sale and covered by warranty. You are buying a specific BOSCH ECU with numbers 55577896 and 0281017592, ready for configuration in the vehicle.
What to check before purchase?
Before ordering, compare:
- GM / OE number: 55577896,
- BOSCH number: 0281017592,
- engine type and vehicle version,
- labels from the original ECU.
If the part numbers match exactly, the probability of correct fitment is very high. For SAAB 9-3 ECUs, do not select the module based only on vehicle model or engine size – always rely on the exact ECU number.
FAQ – questions and answers
Does ECU 55577896 fit SAAB 9-3 1.9 TTiD?
Yes, 55577896 is commonly associated with SAAB 9-3 II 1.9 TTiD. Final compatibility should always be confirmed by checking the number on the original ECU.
What does Bosch 0281017592 fit in SAAB?
0281017592 is a BOSCH ECU used in SAAB 9-3 1.9 TTiD. The safest verification method is matching both numbers: 0281017592 and 55577896.
Is 0281017592 55577896 Plug & Play?
No. This unit is prepared as VIRGIN, meaning it is clean and requires programming after installation.
What does VIRGIN mean in SAAB ECU 55577896?
VIRGIN means the ECU has been cleared of previous vehicle data. It must be programmed and assigned to a new vehicle.
Is ECU 55577896 suitable for SAAB 9-3 Sport Sedan 1.9 TTiD?
Yes, if the vehicle originally had the same part number. In SAAB ECUs, number matching is more important than body version.
How to check if ECU 0281017592 is correct for my SAAB 9-3?
Read the number from your original ECU and compare it with the offer. If both 0281017592 and 55577896 match, compatibility is usually correct.
Does SAAB 9-3 ECU 55577896 come with warranty?
Yes, the offered unit is tested and sold with warranty, which is important when purchasing used automotive electronics.
Does Bosch 0281017592 fit 1.9 TTiD A19DTR engine?
Yes, this ECU number is commonly associated with the 1.9 TTiD engine and A19DTR code. Always confirm with your ECU label.
Does 55577896 0281017592 fit SAAB 9-3 from 2008–2011?
This ECU is typically found in later SAAB 9-3 II models with 1.9 TTiD engines. However, always confirm by part number.
Which ECU for SAAB 9-3 1.9 TTiD – 55577896 or another number?
You should choose exactly the same number as originally installed. If your ECU has 55577896 / 0281017592, select the identical one.
