Skip to main content
English €
Open search engine
Search
Close search engine Clear Search
Products in the cart: 0. See details
Your cart is empty

ABS pumps

Kategorie wpisów

Kategorie wpisów

Tagi

Tagi

Post categories

Post categories

Tags

Tags

Frost, Snow and Moisture: Why Do ECU, BCM and ABS Pump Faults Occur in Winter?

Why Do Engine ECU and Vehicle Electronics Faults Occur in Winter?

ABS and ESP warning lights and the engine management light coming on after a cold night do not necessarily mean that a control unit has failed. Voltage drops, a discharged or ageing battery, moisture or water entering the vehicle’s electronic modules may be the cause.

In this ECUSale guide, we look at problems affecting engine ECUs in the Audi Q7 and Opel Corsa D 1.3 CDTI, as well as Volkswagen ABS pumps. We also explain how to recognise a water-damaged control module and what to check before replacing it.

Read more

ECU engine controller and ABS pump manufacturers – how to choose Bosch, Delphi, Continental, Magneti Marelli, Siemens, FoMoCo, Visteon and ATE

Most popular automotive electronics brands – how to choose the right module?

On the ECUSale blog, we have prepared a practical guide to the most popular automotive electronics manufacturers, such as Bosch, Delphi, Continental, Magneti Marelli, Siemens, FoMoCo, Visteon, ATE and FPT. We explain which engine ECU controllers, ABS pumps, BCM, BSI, BSM modules and gearbox controllers are commonly found under specific brands.

You will also learn why the most important details when choosing a replacement part are the ECU part number, OEM number, HW/SW version and vehicle configuration, not only the module’s appearance or manufacturer brand. We also explain when cloning, a Virgin version, Plug & Play preparation or IMMO OFF may be required.

Read the guide about ECU controller and ABS pump manufacturers

Read more

ABS Pump Failure: Symptoms, Refurbishment, and Tips for Choosing a New Module

ABS Pumps – Regeneration, Common Faults and Choosing the Right Module

The ABS system is a key safety component in every vehicle. At its core lies the ABS pump, consisting of a hydraulic block and an electronic control unit. Over time, this part wears out, which may lead to failures such as the ABS warning light turning on, vibrations in the brake pedal, or reduced braking efficiency. Drivers are then faced with a choice: purchase a brand-new unit, opt for a cheaper used module, or invest in a professionally refurbished ABS pump. In this article, we explain the most common faults, when regeneration is a worthwhile option, and how to choose a reliable module for your car.

Read more