0281019963 8574752 Bosch DDE – ECU ENGINE CONTROLLER BMW diesel, fully tested
0281019963 Bosch DDE 8574752 is an original ECU ENGINE CONTROLLER for BMW designed for selected diesel models. The offered unit has been fully tested before sale, making it a reliable solution when replacing a damaged module. The most important selection criterion is always matching by part number from the label: 0 281 019 963, 8574752 and 13 61 8 574 752.
Which models can 0281019963 8574752 fit?
The 0281019963 controller is found in selected BMW diesel models. Based on catalogs and markings, it is encountered, among others, in the following versions:
- BMW 1 Series F20 / F21 – 114d, 116d
- BMW 2 Series F22 / F23 – 218d, 220d
- BMW 3 Series F30 / F34 – 318d, 320d, 320d xDrive, 320d EfficientDynamics
- BMW 4 Series F32 / F33 / F36 – 418d, 420d, 420d xDrive
- BMW 5 Series F11 – 520d Touring xDrive
- BMW X3 F25 – sDrive18d, xDrive20d
- BMW X4 F26 – xDrive20d
Most often these are vehicles produced around 2014–2018, depending on the model and equipment version. In many cases these are 1.5d and 2.0 diesel engines, however before purchase we recommend comparing the full controller number from your vehicle. In BMW, compatibility by model alone is not always sufficient – the safest way is to match the part by number 0281019963 / 8574752.
How to check compatibility before purchase?
To correctly select the ECU ENGINE CONTROLLER BMW 0281019963, compare the numbers from the label of your old module. The most important markings for this version are:
- Bosch: 0 281 019 963
- BMW OEM: 8 574 752 / 13 61 8 574 752
- Type: DDE
If the part number is the same, the chance of correct fitment is the highest. In case of doubts, it is best to send a photo of your controller label before purchase.
Programming and cloning of BMW 0281019963 controller
In selected cases, the ECU ENGINE CONTROLLER BMW Bosch DDE 0281019963 / 8574752 requires proper preparation before installation in the vehicle. Depending on the vehicle version, equipment and type of fault, programming, adaptation or data cloning from the old module is possible.
Programming of BMW controllers is performed using specialized diagnostic tools and programmers dedicated to automotive electronics. The scope of work depends on the vehicle version and the condition of the old module. The most important factor is always selecting the correct controller by part number and properly transferring data if it is required to maintain the original vehicle configuration.
Cloning 0281019963 via EEPROM and flash files
We offer the possibility of cloning the ECU ENGINE CONTROLLER based on provided data. The service can be performed in two ways:
- by sending EEPROM and flash files from the old controller,
- by sending us the old ECU ENGINE CONTROLLER for data reading and cloning.
After receiving complete data or the module, we prepare a new ECU ENGINE CONTROLLER, transfer the necessary information and return a ready-to-install unit. This solution is particularly useful when maintaining vehicle configuration compatibility and ensuring faster installation after receiving the part.
How to order controller preparation?
If you want to order 0281019963 Bosch DDE 8574752 with preparation service, it is recommended to send a photo of the old module label or provide the part number before purchase. In case of cloning, you can provide EEPROM and flash or send the damaged ECU ENGINE CONTROLLER to our company. After verification, we confirm the possibility of performing the service and prepare the module for shipment.
Product condition
The offered ECU ENGINE CONTROLLER 0281019963 8574752 is fully tested. This is important when purchasing automotive electronics, because for ECU modules not only compatibility matters, but also the reliability of the component itself.
FAQ – questions and answers
Does ECU ENGINE CONTROLLER 0281019963 fit BMW X3 F25 2.0 diesel?
The 0281019963 controller is found in selected versions of BMW X3 F25, including diesel variants. However, it is essential to confirm compatibility by the number from the label of the old module.
0281019963 Bosch DDE – which BMW does it fit?
This number is found in selected models of BMW 1, 2, 3, 4, 5 Series, X3 and X4 with diesel engines. The safest method is matching by numbers 0281019963 and 8574752.
Will 8574752 be suitable for BMW 320d F30?
The number 8574752 appears in selected versions of BMW 320d F30. Before purchase, compare the full Bosch and BMW OEM numbers with your existing controller.
Which ECU ENGINE CONTROLLER for BMW 420d F32 2.0d?
One of the numbers found in this model is 0281019963. The selection must always be confirmed by the label, as different ECU versions may exist within the same model.
Does Bosch 0281019963 fit BMW X4 F26 20d?
Yes, the number 0281019963 is also listed for selected configurations of BMW X4 F26 xDrive20d. The decisive factor is always the part number compatibility.
8574752 BMW ECU ENGINE CONTROLLER – which models does it support?
Most often these are selected versions of BMW 114d, 116d, 218d, 220d, 318d, 320d, 418d, 420d, 520d, X3 and X4. The range depends on engine version, year and configuration.
Should 0281019963 be matched by VIN or by label?
The safest way is matching by the number on the ECU label. VIN can help, but for engine controllers the Bosch and BMW numbers are the most important.
BMW 520d Touring xDrive ECU 8574752 – is this correct?
In selected versions of BMW 520d Touring xDrive, this number appears in catalogs. To be sure, compare it with the markings on your old controller.
Which ECU ENGINE CONTROLLER for BMW 116d F20 diesel?
One of the numbers found in this application group is 0281019963, but before purchase you should verify the full marking of the installed module.
Is 0281019963 8574752 an ECU for BMW 2.0 diesel?
Yes, this number is very often associated with selected BMW 2.0 diesel models, however depending on the version it may also appear in other diesel variants. Always verify compatibility by part number.
