Vendors's code: 55249204
Product code: MJD8F3.M1
Choose additional services
Individual variants may differ in price
Shipping costs are not included in the price.
Shipping costs are not included in the price.
express delivery 3-6 days
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Original engine control unit 55249204 in VIRGIN version – after installation it automatically programs itself to the vehicle (Plug & Play) and works like a factory module; intended for Alfa Romeo MiTo 1.3 JTD / Multijet 1248 cm³, full compatibility guaranteed by part number 55249204 MJD8F3.M1.
Original engine control unit 55249204 designed for Alfa Romeo vehicles equipped with the 1.3 JTD / Multijet 1248 cc engine. The offered module in VIRGIN version has been professionally reset to factory condition, allowing automatic self-programming to the vehicle after installation (Plug & Play) and operating like a brand-new ECU from the dealership. It does not require additional coding or immobilizer intervention – adaptation is performed automatically during the first start-up.
Each 55249204 MJD8F3.M1 ECU is fully tested on a diagnostic bench, including CAN communication verification, power supply line testing, injector control validation, EGR system testing, turbocharger control and sensor diagnostics. The software is factory original, without IMMO OFF modifications or engine map alterations. The product is covered by warranty and ready for immediate installation.
The most important matching criterion is part number 55249204. If your vehicle has the identical marking – the ECU will be 100% compatible regardless of equipment version.
The 55249204 engine control unit was used in Alfa Romeo MiTo models with manual and semi-automatic transmissions. During the first start-up, configuration automatically adapts to the vehicle equipment.
The offered Alfa Romeo MiTo 1.3 JTD engine control unit has been reset to factory settings (VIRGIN). This means:
After connecting module 55249204 to the vehicle installation, automatic coding to the Body Computer and immobilizer takes place. The process is performed automatically during the first ignition cycle.
No. The VIRGIN version is prepared as Plug & Play. ECU 55249204 programs itself to the vehicle during the first start-up.
Yes, if the number on your module is exactly 55249204 – compatibility is full regardless of 75HP, 90HP or 95HP variant.
The production year is secondary. The key factor is part number 55249204. If the marking matches – the module will work correctly.
Yes. We recommend 1:1 matching by part number. An Alfa Romeo ECU with a different number may require additional configuration.
The MJD8F3.M1 version with number 55249204 has specific software and hardware configuration dedicated to the 1.3 JTD 1248 cc engine used in Alfa Romeo MiTo.
Yes. The MJD8F3.M1 module was used in both manual and semi-automatic versions – configuration adapts automatically to the vehicle.
If the original ECU number is 55249204 – yes, it will be fully compatible.
Regardless of whether you own Alfa Romeo MiTo 1.3 JTD 75HP, 90HP or 95HP – if the ECU number is 55249204, the offered module will fit 100%. If in doubt, you can send a photo of the identification label and we will verify compatibility before purchase.
If you've added a review and it doesn't appear on the list, it may be pending moderation.
We use cookies and similar technologies to remember your settings, show you personalized content and ads, and provide social media features. We also use cookies to measure traffic and analyze how our website is used.
By default, only the cookies that are necessary for the site to function properly are enabled. Below, you can accept all types of cookies by clicking "Accept all", or refuse their use (except essential cookies). You can also customize cookies to your needs by selecting "Customize consents". You can withdraw or change your consent at any time by clicking the "Cookie settings" link at the bottom of the page.
Here you can specify your preferences regarding the use of cookies placed by us and external service providers whose services we have added to our site.
These are computer data saved and stored by the browser, which are required for the proper operation of the online store. They are usually installed only in response to your actions, such as: specifying privacy settings, adding a product to the basket, logging in, selecting payment methods and collection points. You can set your browser to block or warn you about these files, but blocking them will prevent the site from functioning. Necessary cookies do not store any personal data that allows for identification.
They allow us to personalize the site and remember previously selected settings. They can be set by us or by external service providers, in the event that we extend the functionality of our store with various add-ons and integrations. Rejecting these files will not affect the correct operation of the store, but some useful functions will be unavailable to you.
They allow us to count visits and traffic sources. This allows us to analyze how our site is navigated and improve its performance. We can also check the popularity of our products and improve the offer. The data collected is completely anonymous and does not allow for the identification of specific users. If you do not allow these files, we will not know when you visit our site and we will not be able to ask you to express your opinion about purchases.
They allow us to better tailor the displayed advertising content to your interests and promote our products on other websites you visit. Marketing cookies do not store personal data. They are based on the unique identification of your browser and internet device. If you do not allow their use, ads will still be displayed, but they will not be personalized based on cookie data.
