BMW CAS4 Module 61359282116 5WK50520GBR with Key
The offered BMW CAS4 module 61359282116 is supplied together with the key shown in the photo. This part was used in selected BMW F-platform vehicles and should be correctly matched and prepared for the specific vehicle before installation.
BMW CAS4 Module Applications
Part number 61 35 9 282 116 belongs to the CAS4 module family used in selected BMW models. Confirmed model families include:
- BMW 5 Series F07 / F07 LCI – Gran Turismo,
- BMW 5 Series F10 / F10 LCI – Saloon,
- BMW 5 Series F11 / F11 LCI – Touring,
- BMW 6 Series F06 / F06 LCI – Gran Coupé,
- BMW 6 Series F12 / F12 LCI – Convertible,
- BMW 6 Series F13 / F13 LCI – Coupé,
- BMW 7 Series F01 / F01 LCI – Saloon,
- BMW 7 Series F02 / F02 LCI – long-wheelbase version,
- BMW 7 Series F03 / F03 LCI and F04 – selected versions,
- BMW X3 F25 – SAV,
- BMW X4 F26 – SAC.
The CAS4 family was used with many petrol, diesel and other powertrain variants, so the module should not be selected solely by engine size, vehicle model or year. Before purchasing, compare the identification numbers on the original module with the offered unit.
Part number 61359282116 was used as a CAS4 module version around 2012–2013 and was later superseded by newer BMW part numbers. A superseding part number does not automatically mean that a used module can be installed without prior preparation.
Common Symptoms of a Faulty CAS4 Module
A malfunctioning CAS can cause problems with vehicle access, key recognition or starting the vehicle. Common symptoms include:
- no response when attempting to start the vehicle,
- ignition does not switch on or works only intermittently,
- the key is not recognised correctly,
- messages relating to the key or access system appear,
- intermittent starting problems,
- diagnostics indicate a communication fault with the CAS module.
Similar symptoms may also be caused by other components of the vehicle’s electrical system, so proper diagnostics are recommended before replacing the CAS module.
Cloning, Programming and Module Preparation
A used CAS4 5WK50520GBR requires proper preparation for the vehicle. Simply connecting an unprepared module from another vehicle is not the correct replacement procedure.
- if the data from the original CAS can be read, it may be transferred or cloned to the replacement module,
- depending on the preparation method, module coding may be required,
- synchronisation of components responsible for vehicle start authorisation may be necessary,
- the keys must be correctly matched to the data stored in the vehicle’s security system,
- the most appropriate preparation method should be determined after checking the original CAS and the vehicle data.
If the original module is available, we recommend sending a clear photo of its identification label before preparation. This makes it possible to verify compatibility and choose the correct preparation method.
Frequently Asked Questions – BMW CAS4
Does BMW CAS4 61359282116 fit the 5 Series F10 and F11?
|
Part number 61359282116 belongs to the CAS4 family used in the BMW 5 Series F10 Saloon and F11 Touring. However, different module variants were fitted within these model ranges, so the numbers on the original part must be compared before purchase.
Does the CAS4 5WK50520GBR fit the BMW X3 F25?
|
Modules from this family were used in the BMW X3 F25, but these vehicles were produced with many different engine and equipment configurations. Compatibility should therefore be confirmed using the identification numbers on the original CAS, rather than by vehicle model alone.
Will 61 35 9 282 116 work in a BMW 7 Series F01 or F02?
|
This module family has confirmed applications in selected BMW 7 Series F01 and F02 vehicles. However, not every vehicle uses the same CAS configuration, so the original part numbers must be checked and the replacement module must be prepared accordingly.
Does a used BMW CAS4 61359282116 need programming?
|
This type of module should not be treated as a standard Plug & Play part. Depending on the situation, data cloning, programming, coding or synchronisation may be required. If the original CAS is available and readable, its data can be used to prepare the replacement module.
Can CAS4 5WK50520GBR be selected only by BMW model and engine capacity?
|
No. CAS4 modules were used with many different BMW engine variants, so information such as 2.0, 3.0 or the vehicle model alone does not guarantee compatibility. The safest approach is to compare the part numbers and identification markings on the original module and determine the required preparation method before installation.
