BMW CAS4 Module 61359359013 9359013 5WK50822HBR with Key
The offered BMW CAS4 module 61359359013 is part of the vehicle access and start authorisation system. The set includes the module, key and the components shown in the photos. Before installation, the CAS must be correctly matched and prepared for the specific vehicle.
BMW CAS4 Module Applications
BMW part number 9359013 was used in selected BMW F-Series vehicles. Confirmed applications for this module family include:
- BMW 7 Series F01 / F02 – Saloon, selected engine versions,
- BMW 7 Series F04 – selected versions,
- BMW 5 Series GT F07 – Gran Turismo, selected petrol and diesel versions,
- BMW 5 Series F10 – Saloon, selected engine versions,
- BMW 5 Series F11 – Touring, selected engine versions,
- BMW 6 Series F06 – Gran Coupé, selected versions,
- BMW 6 Series F12 / F13 – Convertible and Coupé, selected versions,
- BMW X3 F25 – selected engine versions,
- BMW X4 F26 – selected engine versions.
The CAS4 module was used with various powertrains, so it should not be selected solely by vehicle model, year or engine capacity. Before purchasing, compare the numbers on the original module with 61359359013, 9359013 and the 5WK50822HBR reference.
Common Symptoms of a Faulty CAS4 Module
A faulty CAS can cause problems with key recognition, ignition or starting the vehicle. Possible symptoms include:
- no response when attempting to start the vehicle,
- the key is not recognised or works only intermittently,
- the ignition cannot be switched on,
- intermittent engine starting problems,
- messages relating to the key or access system,
- no diagnostic communication with the CAS module.
Similar symptoms may also be caused by other components of the vehicle’s electrical system, so proper diagnostics are recommended before replacing the module.
CAS4 Cloning, Programming and Preparation
A used BMW CAS4 5WK50822HBR must be correctly matched to the specific vehicle. Simply installing a module taken from another BMW does not guarantee that the vehicle will start.
- if the original CAS can be read, the required data can be transferred to the replacement module,
- depending on the preparation method, module coding may be required,
- the CAS must communicate correctly with the vehicle’s start authorisation system,
- the key must be correctly matched to the data stored in the system,
- the appropriate preparation method is determined based on the original module and the vehicle configuration.
If you still have the original CAS module, we recommend sending us a clear photo of its identification label. This allows compatibility to be verified before the set is prepared.
Frequently Asked Questions – BMW CAS4 9359013
Does BMW CAS4 9359013 fit the BMW 5 Series F10 and F11?
|
Part number 9359013 / 61359359013 was used in selected BMW 5 Series F10 Saloon and F11 Touring models. As different CAS versions were fitted to these vehicles, the identification numbers on the original module must be compared before purchase.
Can 5WK50822HBR be installed in a BMW X3 F25?
|
CAS4 part number 9359013 has confirmed applications in selected BMW X3 F25 vehicles. However, the vehicle model alone is not sufficient to confirm compatibility – the identification numbers on the factory-fitted module should be checked.
Does BMW CAS4 61 35 9 359 013 fit 2.0 or 3.0 engine versions?
|
CAS4 modules from this family were used in vehicles with various powertrains. A 2.0 or 3.0 engine capacity alone is not sufficient to identify the correct CAS module. The original module number and version are the most important factors when confirming compatibility.
Does a used BMW 61359359013 module need programming?
|
A CAS module taken from another vehicle requires proper preparation. Depending on the individual case, data transfer, coding or synchronisation with the other components of the vehicle’s starting system may be required.
Can a faulty BMW CAS4 5WK50822HBR be cloned?
|
If the required data can still be read correctly from the original module, it can be transferred to a working CAS4 replacement. In the case of severe damage, the possibility of preparing a replacement must be assessed after inspecting the original module.
