ABS pump 476601563R with control unit 28561056403
Complete ATE ABS pump for Renault Mégane III / Scénic III: the set includes the hydraulic block (pump) and the ABS control unit – hydraulics and electronics in one module. The label shows the numbers 476601563R and 28561056403.
Used, after a workshop test: electronics and hydraulics checked on a test machine, together with a pressure test.
Which cars pump 476601563R fits
Confirmed application: Renault Mégane III / Scénic III. Before buying, compare the pump and control unit numbers with the label of your module, because the number decides the match.
Typical ABS module faults
A faulty pump or control unit can show up as:
- ABS and/or ESP light on,
- fault codes for the pump motor, valves or ABS control unit supply,
- no communication with the ABS module in diagnostics,
- weaker braking or one wheel locking.
However, the ABS light is often caused by a wheel speed sensor, the ABS ring or the wiring rather than the pump itself. Run diagnostics before buying and see our guide ABS pump failure – symptoms and refurbishment.
Is coding needed?
That depends on the car and the pump type – not every pump needs coding or adaptation with a tester. Bleeding the brake system after fitting, however, is always necessary.
Numbers to compare
| Marking | Number (different formats) |
|---|
| Pump number (OEM) | 476601563R / 95CT2AAY2 |
| Hydraulic block / pump – manufacturer number | 10.0212-0466.4 / 10021204664 |
| ABS control unit – manufacturer number | 28.5610-5640.3 / 28561056403 |
The numbers come in several formats: as they look on the labels and as they are typed into search engines.
Warranty and help with matching
Questions about ABS pump 476601563R
| Question |
Answer |
| How can I check that 476601563R fits my car? |
The numbers on the label of your module must match: pump 476601563R, control unit 28561056403. Application: Renault Mégane III / Scénic III. |
| Is it worth running diagnostics before buying a pump? |
Yes. The ABS light is often caused by a wheel speed sensor, the ABS ring or the wiring rather than the pump itself. |
| I am not sure the pump fits – what should I do? |
Send us a photo of your module label and we will check the numbers. |
| Does the pump need coding after fitting? |
It depends on the car and the pump version – not every pump needs coding. The brake system must always be bled. |
| Is pump 476601563R tested? |
Yes. It is a used unit tested on a machine – electronics, hydraulics and a pressure test. |
