0281013872 9664843780 – how to choose the right ECU
We offer a used Bosch EDC16C34 ECU intended for Peugeot and Citroën with the 1.4 / 1.6 HDi engine. The unit is checked before it is sent.
After purchase, please send us your vehicle details: model, engine capacity and gearbox type.
What you get
- IMMO OFF plug & play version – no programming and no immobiliser pairing after fitting.
- Free cloning of data from your ECU (once you send it to us).
- EGR OFF and DPF OFF on request – DPF OFF only for cars with a DPF.
- Warranty: 6 months.
- After purchase we need the car model, engine capacity and gearbox type from you.
Numbers on the label
- Bosch number: 0281013872
- PSA number: 9664843780
- ECU type: Bosch EDC16C34
When you may need ECU 0281013872
A faulty ECU can show up as: no start and no injector control, no communication in diagnostics, no power to the ECU with good fuses, or a failure after water ingress or a short circuit. The same symptoms are sometimes caused by wiring, power supply or a sensor – run a diagnosis first.
Does ECU 0281013872 fit your car?
Model and year of manufacture are not enough. Compare the label on your ECU with 0281013872, 9664843780 – if they match, it is the same unit. It fits selected versions of Peugeot and Citroën with the 1.4 / 1.6 HDi engine. If in doubt, send us a photo of the label.
See also
You will find more engine ECUs in the Peugeot and Citroën categories. All units from this manufacturer are listed on the Bosch page.
FAQ – ECU 0281013872 (Bosch EDC16C34)
Can you switch off EGR or DPF in ECU 0281013872?
Yes, EGR OFF and DPF OFF are done on request. DPF OFF only for cars with a DPF.
|
What vehicle details should I send after purchase?
The vehicle model, engine capacity and gearbox type.
|
Does ECU 0281013872 fit my car?
Compare the label of your ECU with the numbers 0281013872, 9664843780. If they match, the ECU fits – the car model alone does not decide this.
|
Does ECU 0281013872 need programming?
No. It is an IMMO OFF plug & play version: the immobiliser is disabled, so no programming is needed after fitting.
|