55252680 CFC328.F13 – Gearbox Controller Fiat Panda 0.9 TwinAir Dualogic
Gearbox controller 55252680 CFC328.F13 is an original Magneti Marelli transmission control module used in selected Fiat Panda vehicles equipped with the automated Dualogic gearbox. The module controls gear shifting operation, communicates with vehicle electronics and manages the transmission system.
The offered module is fully tested, ready for installation and covered by warranty. Compatibility should always be confirmed primarily by part numbers: 55252680 and CFC328.F13. Vehicle model or housing appearance alone does not always guarantee compatibility.
Application – 55252680 CFC328.F13 Gearbox Module
- Brand: Fiat
- Model: Fiat Panda
- Engine: 0.9 TwinAir / 900T
- Transmission: Dualogic automated gearbox
- Production years: mostly around 2012–2016
- Module manufacturer: Magneti Marelli
Part Numbers for Comparison
- 55252680
- CFC328.F13
- BC.0120720.A
- FJE006CK
Before purchase, compare your original transmission controller number with the numbers listed in this offer. The most important reference is 55252680 CFC328.F13. Different software versions or module variants used in Fiat Panda Dualogic gearboxes may cause operational problems after installation.
Typical Symptoms of Fiat Panda Dualogic Gearbox Controller Failure
- unable to change gears,
- vehicle remains in neutral,
- gearbox warning light on dashboard,
- communication faults with transmission controller,
- Dualogic gearbox emergency mode,
- jerking or incorrect gear shifting,
- no response after selecting drive gear,
- adaptation problems after gearbox repair.
Why Match the Gearbox Controller by 55252680 Number?
The Fiat Panda Dualogic gearbox controller must be matched according to the exact part number and module version. Numbers 55252680 and CFC328.F13 help avoid compatibility mistakes and improve the chances of proper operation after installation.
Condition of the Offered Module
The offered 55252680 CFC328.F13 gearbox controller is used, tested and prepared for installation. Every module is checked before shipping. Warranty included.
FAQ – Fiat Panda Gearbox Controller 55252680 CFC328.F13
Does gearbox controller 55252680 CFC328.F13 fit Fiat Panda 0.9 TwinAir?
Yes, the 55252680 CFC328.F13 controller is used in selected Fiat Panda models equipped with the 0.9 TwinAir / 900T engine and Dualogic transmission. Always compare the original module numbers before purchase.
Does CFC328.F13 fit every Fiat Panda Dualogic gearbox?
No. Different Dualogic gearbox controller versions exist. Compatibility must be confirmed by the full numbers CFC328.F13 and 55252680.
What symptoms can a faulty Fiat Panda 55252680 gearbox controller cause?
A damaged 55252680 module may cause inability to shift gears, emergency mode, communication faults, neutral position lock or adaptation problems.
Is gearbox controller 55252680 tested before shipping?
Yes, the offered 55252680 CFC328.F13 transmission controller is fully tested before sale and covered by warranty.
Can I install CFC328.F13 instead of another CFC328 version?
Not always. The designation CFC328 alone is not sufficient. The complete number CFC328.F13 and part number 55252680 must match.
Does Fiat Panda Dualogic controller 55252680 require programming?
Depending on vehicle configuration, adaptation or diagnostic procedures may be required after installation. Compatibility should always be confirmed using the original module number.
