Gearbox controller 51900169 CFC328F16 – Lancia Ypsilon automatic transmission
Gearbox controller 51900169 CFC328F16 is an original electronic module responsible for controlling the operation of the automated gearbox in vehicles of the Fiat / Lancia group. The module marked CFC328F.16 manages gear shifting, cooperation with the clutch system and communication with other vehicle controllers via the CAN bus.
The offered module 51900169 CFC328F16 has been fully tested and prepared for reinstallation. Each controller undergoes functional tests and electronic inspection, ensuring that you receive a fully working product ready for installation in the vehicle.
Compatibility – which vehicles use controller 51900169
The gearbox module 51900169 / CFC328F16 / CFC328F.16 was used in selected models of Fiat and Lancia vehicles equipped with an automated gearbox.
Most common applications:
- Lancia Ypsilon – model years approximately 2006–2011
- Lancia Ypsilon II – selected versions with automatic gearbox
- Fiat Panda – versions equipped with Dualogic transmission
- Fiat 500 – models with automatic gearbox
- Fiat Punto – selected versions with robotized gearbox
Most commonly associated engines:
- 1.2 8V petrol
- 1.4 8V petrol
- 1.3 Multijet diesel
Exact compatibility should always be confirmed by the part number:
51900169
CFC328F16
CFC328F.16
If in doubt, compatibility verification by the vehicle VIN number is possible.
Technical condition
- original gearbox controller
- fully tested before sale
- electronics and CAN communication test
- product ready for installation
- warranty provided
Each module is prepared by specialists dealing with automotive electronics. Thanks to this, the CFC328F16 controller can be safely installed in the vehicle and restore the proper operation of the gearbox.
FAQ – frequently asked questions about controller 51900169 CFC328F16
Does gearbox controller 51900169 fit Lancia Ypsilon 1.2?
Yes, controller 51900169 CFC328F16 was used in selected versions of Lancia Ypsilon with the 1.2 engine and automated gearbox. Compatibility should be confirmed by the part number.
Which gearbox is module CFC328F.16 designed for?
The module CFC328F.16 controls the automated Dualogic gearbox used in Fiat and Lancia vehicles.
Does gearbox controller 51900169 fit Fiat Panda 1.3 Multijet?
In many cases yes – controller CFC328F16 was installed in Fiat Panda models equipped with the 1.3 Multijet engine and robotized gearbox.
What are the symptoms of a faulty CFC328F16 controller in Lancia Ypsilon?
Typical symptoms include inability to change gears, gearbox error messages, transmission emergency mode or no reaction of the gearbox when selecting a gear.
Does the number CFC328F16 have to be identical to the old controller?
Yes, in the case of gearbox controllers it is recommended to use the identical part number, such as 51900169 or marking CFC328F.16, to ensure full compatibility with the vehicle.
Can gearbox controller 51900169 be installed in Fiat 500 1.2?
In some Fiat 500 versions with Dualogic transmission a module marked CFC328F16 was used. Before purchase it is best to verify compatibility by VIN number or part number.
Does controller CFC328F16 require programming after installation?
Depending on the vehicle version, gearbox adaptation using a diagnostic device may be required.
Where is gearbox controller 51900169 located in Lancia Ypsilon?
The module CFC328F16 is usually located in the engine compartment near the gearbox and connected to the vehicle’s electrical system.
