What do we offer under number 51815932?
Number 51815932 (and CFC208F.20) is an original Magneti Marelli control unit for the Selespeed automated manual gearbox. The unit is used and is bench-tested before shipping.
Does it need programming?
No – control unit 51815932 does not need programming. The numbers on the label just have to match your unit.
See also
Other versions of this type of control unit (always choose by the label number): 55201188 / CFC208F.10, 46767510 / CFC208F.01, 55201377 / CFC208F.08, 55201376 / CFC208F.09, 51800536 / CFC228F.04.
Typical fault symptoms
A control unit fault may be indicated by:
- gearbox warning light or fault message,
- no communication with the gearbox control unit in diagnostics,
- jerking when pulling away or changing gear,
- the gearbox will not engage a gear or stays in neutral (N).
Before ordering, have the gearbox diagnosed – the clutch or gear-shift actuator sometimes causes similar symptoms.
Application
Confirmed application of this number: Lancia Musa 1.3 JTD 16V. The list is not closed: if your car is missing, it may still fit, and a listed model is no guarantee. What matters is that numbers 51815932 and CFC208F.20 match the label of your original unit – a different ending of the number means a different version.
Markings of control unit 51815932
| Label | Number (different formats) |
| Fiat number | 51815932 |
| BC code | BC.0094542.A / BC0094542A |
| Control unit type | CFC208F.20 / CFC208F20 |
| Label code | FDA26HBK |
| Application code | MUSA 1248 16V 90JTD SELE NQS |
Warranty and contact
The control unit comes with a warranty: 6 months. More control units: Lancia Transmission Control Units (TCU). Question about a number? Contact us.
FAQ – gearbox control unit 51815932 / CFC208F.20
| Question |
Answer |
| Which cars use 51815932? |
We have confirmed it in: Lancia Musa 1.3 JTD 16V. The label number still decides. |
| How do I check whether the unit fits my car? |
Compare numbers 51815932 and CFC208F.20 with the label of your unit – they must match, including the ending. |
| Does the control unit need programming? |
No, the control unit does not need programming. |
| Is this an automatic gearbox control unit? |
It controls an automated manual gearbox: a conventional gearbox with a clutch, where gear changes and the clutch are operated by electronically controlled actuators. It is not a torque-converter automatic. |