Automatic gearbox control unit 55201377 for Fiat Punto 1.3 JTD Selespeed
Original Magneti Marelli gearbox control unit for Fiat Punto with 1.3 JTD 1248 cm³ 16V engine and Selespeed gearbox. The module has the following numbers on the label: 55201377, 62000.042.01, CFC208F.08, FDA41DQ0, 540P6T3CE and the marking PUNTO 1248 16V JTD SELESPEED. The control unit has been fully checked, prepared for installation and is covered by warranty.
Application and compatibility
The 55201377 CFC208F.08 control unit is used in selected versions of the Fiat Punto with 1.3 JTD / 1.3 Multijet 16V engine and Selespeed automated gearbox. It is most commonly found in model years around 2003–2006, depending on the vehicle version, market and equipment.
- Fiat Punto – 1.3 JTD 16V
- engine capacity: 1248 cm³
- gearbox: Selespeed
- possible engine code: 188A9000, depending on the vehicle version
- control unit manufacturer: Magneti Marelli
Before purchase, the numbers on the old control unit should be compared. The most important compatibility references are 55201377, 62000.042.01, CFC208F.08 and the description PUNTO 1248 16V JTD SELESPEED.
Common symptoms of a faulty 55201377 control unit
- gears cannot be engaged in Fiat Punto Selespeed,
- gearbox fault message,
- problem with N, 1 or R position,
- no diagnostic communication with the gearbox control unit,
- Selespeed gearbox emergency mode,
- jerking, delayed gear changes or no gearbox response.
Tested Magneti Marelli control unit with warranty
The offered 55201377 62000.042.01 CFC208F.08 module has been technically checked before sale. It is an original TCU gearbox control unit for Fiat Punto 1.3 JTD Selespeed, prepared as a replacement part for repairing issues with the automated gearbox. Depending on the vehicle configuration, programming, adaptation or cloning of data from the old control unit may be required.
Frequently asked questions – 55201377 CFC208F.08 gearbox control unit for Fiat Punto Selespeed
Does the 55201377 control unit fit Fiat Punto 1.3 JTD Selespeed?
Yes, the 55201377 Magneti Marelli control unit is used in selected versions of the Fiat Punto 1.3 JTD 16V with Selespeed gearbox. Before purchase, the number on the old module should be compared with the label.
Does the 62000.042.01 CFC208F.08 module require programming?
The 62000.042.01 CFC208F.08 control unit may require adaptation, programming or data cloning to work correctly with a specific vehicle. This depends on the Fiat Punto version and gearbox configuration.
What are the symptoms of a faulty Fiat Punto 1.3 JTD gearbox control unit?
A faulty gearbox control unit may cause loss of gears, emergency mode, problems with N / R position, jerking during gear changes and no diagnostic communication with the TCU module.
Is the FDA41DQ0 number important when selecting the control unit?
Yes, the FDA41DQ0 marking helps identify the exact module version. However, the most important numbers for compatibility and search are 55201377, 62000.042.01 and CFC208F.08.
Does the CFC208F.08 control unit fit Fiat Punto 1248 16V JTD?
Yes, the control unit label indicates the version PUNTO 1248 16V JTD SELESPEED, which means Fiat Punto with 1.3 JTD 1248 cm³ 16V engine and Selespeed gearbox. For certainty, all numbers should be checked against the original control unit.
