Gearbox control module 55269666 CFC319F.03 for Fiat 500 – tested unit with warranty
The offered gearbox control module 55269666 / CFC319F.03 is designed for Fiat 500 vehicles equipped with an automatic or automated transmission. This module has been fully checked, tested and prepared for sale, making it a reliable solution when the original gearbox controller has failed.
This is a used, original component responsible for gearbox operation, gear selection and communication with other vehicle systems. Every unit is verified before shipping, and the purchase is covered by a warranty.
Vehicle compatibility
The 55269666 CFC319F.03 module is used in selected versions of the Fiat 500 with electronically controlled gearbox systems. Within the CFC319F.03 controller family, similar applications may also appear in related Fiat model versions, which is why exact matching by part number and label marking is essential.
- Fiat 500
- Selected production years: approximately 2007–2016
- Transmission: automated / robotized
- Engines found in these versions: 1.2, 1.3 Multijet, selected 1.4 – depending on vehicle configuration
Important: for gearbox controllers, compatibility must always be confirmed using part number 55269666 and marking CFC319F.03. The same Fiat 500 model may use different module versions.
When is gearbox controller replacement worth considering?
A faulty gearbox controller may cause gear selection problems, transmission limp mode, inability to engage a gear, or communication errors stored in diagnostics. In many cases, replacing module 55269666 CFC319F03 helps restore correct gearbox operation and prevents further transmission-related issues.
Typical symptoms of gearbox controller failure 55269666
- unable to engage a gear
- jerking during gear changes
- gearbox limp mode
- transmission warning messages on the dashboard
- no response when selecting drive mode
- difficulty moving off or reversing
- communication faults stored in diagnostics
Why choose a tested Fiat 500 gearbox control module?
Buying a tested module is a safer option than installing an unverified used part from an unknown source. The offered Fiat 500 gearbox control module 55269666 CFC319F.03 has already been checked, so you receive a component ready for installation in the vehicle.
FAQ – frequently asked questions
Does gearbox control module 55269666 fit every Fiat 500?
No. Compatibility must be checked using the full part number and CFC319F.03 marking. Different versions of gearbox modules were used in the Fiat 500 range.
Which transmission is CFC319F03 used with in Fiat 500?
It is used in selected versions with electronically controlled automated transmission. Before buying, it is best to compare the number with the original part.
Does 55269666 CFC319F.03 fit Fiat 500 1.2?
It may be used in such versions, but final confirmation should always be based on the gearbox controller label number.
Is Fiat 500 gearbox control module CFC319F.03 compatible with 1.3 Multijet?
Controllers from this family are also found in configurations linked with the 1.3 Multijet engine, but the most important factor is matching the full module number.
What symptoms are caused by a faulty Fiat 500 gearbox controller 55269666?
The most common symptoms include shifting problems, inability to engage a gear, gearbox limp mode, or diagnostic faults stored in the transmission controller.
Is CFC319F.03 from Fiat 500L the same as in Fiat 500?
Not always. The controller family marking may look similar, but compatibility should be confirmed using the full OE number and exact module designation.
Is it worth buying a tested gearbox controller 55269666 for Fiat 500?
Yes, because a previously tested module reduces the risk of installing a faulty part and makes diagnosis faster and easier.
