46767510 (CFC208F.01) – used gearbox control unit
On this page you can buy an original Magneti Marelli control unit for the Selespeed automated manual gearbox. It is a used unit, bench-tested before shipping. Key numbers: 46767510 and CFC208F.01.
Typical fault symptoms
Look out for:
- no communication with the gearbox control unit in diagnostics,
- the gearbox goes into limp mode,
- gearbox warning light or fault message.
Note: the cause may also be the clutch or gear-shift actuator. A gearbox diagnosis before buying will rule this out.
Markings of control unit 46767510
| Label | Number (different formats) |
| Fiat number | 46767510 |
| Magneti Marelli number | 62000.013.05 / 6200001305 |
| Control unit type | CFC208F.01 / CFC208F01 |
| Label code | A0B86A21 |
| Application code | ALFA 147 SELESPEED ECE FASE3 |
Each number is shown in several spellings, because that is how it appears on labels and in search engines.
Fitting without programming
You fit this module without programming. The condition: the same numbers on the label as on your unit – check them before ordering.
Application
Confirmed application of this number: Alfa Romeo 147 2.0 16V. The list is not closed: if your car is missing, it may still fit, and a listed model is no guarantee. What matters is that numbers 46767510 and CFC208F.01 match the label of your original unit – a different ending of the number means a different version.
Is your number different from 46767510?
Check similar control units in our range: 55201377 / CFC208F.08, 51815932 / CFC208F.20, 55201376 / CFC208F.09, 55201188 / CFC208F.10, 55268609 / CFC448F.03. Remember that the number on the label decides.
Warranty
The warranty on this control unit is 6 months. You will find other gearbox control units in Fiat Transmission Control Units (TCU). Questions about choosing the number? Contact us.
Questions and answers: 46767510
| Question |
Answer |
| How do I know that 46767510 will fit? |
The label of your unit must show the same numbers: 46767510 and CFC208F.01, including the ending. |
| Does the control unit need programming? |
No, the control unit does not need programming. |
| Which cars does this control unit fit? |
Confirmed application: Alfa Romeo 147 2.0 16V. The label number has the final say. |
| How does an automated manual gearbox differ from an automatic? |
It is a conventional gearbox with a clutch – gear changes and the clutch are operated by electronically controlled actuators. It has no torque converter like an automatic. |