Skip to main content
English / €
Wishlist
Products in the cart: 0. See details

Your cart is empty
Open search engine
Search
Close search engine Clear Search
Go to Product feedback

BG91-12A650-FGE 28403828 ECU ENGINE CONTROLLER G2614 DCM3.5 FORD BG9112A650FGE

DELPHI

Engine Control Unit Ford BG91-12A650-FGE / 28403828 | DCM3.5 G2614

Original, tested Ford DCM3.5 BG91-12A650-FGE engine control unit, prepared for PATS programming using Forscan or IDS diagnostic tools.

Go to full description
Fast delivery of ECU engine unit – within 1–2 working days
English / €
with VAT without VAT
Price €330.56
incl. 23% VAT

Shipping costs are not included in the price.

Shipping from €42.50 - UPS express delivery around world (Afghanistan)

express delivery 3-6 days
pcs
Availability:
available
Ask about the product

info

Information

  • CAR MODEL FORD
  • ENGINE 2.0 TDCI
  • OEM: 28403828 G2614 DCM3.5
  • PART NUMBER BG91-12A650-FGE
  • VARIANT READY FOR PROGRAMING
  • WARRANTY 6 MONTH
  • TESTED Second hand product
  • PAYMENT: Credit Card , Bank Transfer , PayPal
  • EXPRESS DELIVERY – in EU Countries: European Union 2-3 working days
  • INTERNATIONAL DELIVERY – Outside EU Countries: Worldwide 4-7 working days

description

Engine Control Unit Ford BG91-12A650-FGE G2614 DCM3.5 | Engine Computer 28403828 BG9112A650FGE

We offer an original Ford engine control unit BG91-12A650-FGE (references: 28403828, BG9112A650FGE, type DCM3.5 G2614) – fully tested and prepared for programming. This ECU is designed for selected Ford diesel models and is ideal as a replacement for a faulty unit.

Each unit undergoes communication, power supply, CAN line and memory testing to ensure you receive a module ready for further adaptation in your vehicle.

Part numbers and identifiers

To choose the correct engine control unit, compare the numbers on the label:

  • Ford number: BG91-12A650-FGE
  • Full number: BG9112A650FGE
  • Additional number: 28403828
  • Controller type: DCM3.5 G2614

If the numbers on your ECU are the same or very similar, this engine computer will be the correct replacement.

Programming the DCM3.5 ECU – required tools

To start the vehicle with this BG91-12A650-FGE / DCM3.5 ECU, programming is required. It can be performed using:

  • Ford IDS – official Ford diagnostic software with full PATS and configuration support.
  • Forscan with a compatible interface (HS-CAN / MS-CAN).
  • Professional diagnostic tools (Autel, Launch, Jaltest) – with PATS programming capability.

Short programming procedure (PATS / configuration)

  1. Install the BG91-12A650-FGE ECU in the vehicle.
  2. Connect using Ford IDS, Forscan or another compatible device.
  3. Perform ECU identification and clear existing fault codes.
  4. Enter the PATS / Immobiliser module and perform ECU initialization and key programming.
  5. Carry out engine ECU configuration if required (equipment options, gearbox type, etc.).
  6. Start the engine and perform a short drive to complete adaptation.

With proper equipment, the process usually takes only several minutes.

Important information before purchase

  • Compare all part numbers with your original ECU before ordering.
  • We recommend installation and programming in a professional workshop.
  • If unsure, send us a photo of your ECU label along with your vehicle details.

Question: Will the BG91-12A650-FGE ECU fit my Ford?

Answer: Matching part numbers is crucial. If your ECU has BG91-12A650-FGE, BG9112A650FGE or 28403828, and type DCM3.5 G2614, this is the correct replacement. You may also send us a photo for verification.

Question: Is this Ford DCM3.5 ECU plug & play?

Answer: No. The BG91-12A650-FGE / DCM3.5 is not plug & play. Ford PATS requires immobiliser programming and ECU initialization after installation.

Question: Which tool can program the BG91-12A650-FGE ECU?

Answer: Programming is possible using Ford IDS, Forscan (HS-CAN / MS-CAN interface) or professional diagnostic tools supporting Ford PATS.

Question: What does “tested, prepared for programming” mean?

Answer: It means the ECU has passed electronic and communication tests and is ready for reprogramming and adaptation according to the PATS procedure.

Question: Can I return the ECU if it does not fit?

Answer: Yes, returns are possible within the store’s policy. We recommend verifying part numbers beforehand to avoid unnecessary costs.

Electronic Car Parts FAQ – ECUSALE

1. Are the electronic modules tested before shipping?

Yes. Every electronic module, including ECU ENGINE CONTROLLERS, ABS pumps, BSI, BCM, comfort modules, transmission controllers and other automotive electronics, is electronically tested before shipping. We verify communication, power supply and basic operation to ensure the product is working correctly before delivery. This allows you to receive a tested and ready-to-install unit.

2. Does the module require programming or coding after installation?

It depends on the product version and the type of module. We offer VIRGIN, IMMO OFF and Plug & Play solutions. Information about programming or coding requirements is always included in the product description. In many cases, installation is possible without additional coding, while some modules may require adaptation using diagnostic equipment.

3. How can I choose the correct module for my vehicle?

The most important step is comparing the part numbers from your original module. Please check the Bosch, Siemens, Magneti Marelli, Continental or OEM manufacturer numbers on the label. If you are unsure, you can send us a photo of your original module or your vehicle VIN number and we will help verify compatibility.

4. Are the products covered by warranty?

Yes. All electronic automotive modules sold in our store are covered by warranty. Every product is checked and prepared before shipping. If any problem occurs, we also provide technical support and product diagnostics assistance.

5. Which payment methods are available in your store?

We offer secure online payments through Stripe and PayPal. Customers can pay using credit or debit cards, Apple Pay, Google Pay, Klarna, online bank transfers and other secure payment methods. After placing an order, you will receive a secure online payment link.

Reviews

Number of ratings: 0
Rate and review

Similar products

    Blog:
    enter

    • Basic Information 22-05-2026

      Audi Q7 3.0 TDI Water Damaged Engine ECU| 4L1910401D & 4L0910401G IMMO OFF Plug & Play

      Audi Q7 3.0 TDI won’t start after heavy rain? The engine ECU could be water damaged

      One of the most common failures in the Audi Q7 3.0 TDI is water damage affecting the Bosch EDC17CP04 engine ECU. This issue frequently impacts units 0281015868 and 0281014174, which are mounted beneath the windscreen scuttle panel, an area highly exposed to moisture and blocked drainage channels that can lead to corrosion inside the ECU.

      In this article, we explain the typical symptoms of a failed Audi Q7 3.0 TDI engine control unit, when ECU cloning is still possible, and why in many situations an IMMO OFF Plug & Play solution is the fastest and most reliable repair option.

      0281015868 & 0281014174 – common ECU failures in the Audi Q7 3.0 TDI

      Learn why engine ECUs such as 4L1910401D and 4L0910401G are especially vulnerable to water ingress, which fault codes usually appear during diagnostics, and how professional ECU repair or replacement is performed for the Audi Q7 3.0 TDI.

      Read more
    • Basic Information 13-05-2026

      Water-Damaged Bosch 0281013691 / 4L0910401K ECU – Common Audi Q7 3.0 TDI Engine Control Unit Failure

      Water Damage in Bosch 0281013691 / 4L0910401K ECU – A Common Audi Q7 3.0 TDI Failure

      The Bosch 0281013691 / 4L0910401K engine control unit fitted to the Audi Q7 3.0 TDI 4L is well known for being vulnerable to water damage. In many cases, the issue is caused by the ECU’s location beneath the windshield cowl, where moisture and rainwater can accumulate over time due to blocked drainage channels.

      Symptoms of a failing ECU may appear gradually or occur suddenly after heavy rain, a car wash, or long periods of vehicle inactivity. Common signs include no communication with the engine control module, intermittent or complete no-start conditions, CAN bus communication faults, and in severe cases, a completely dead ECU in the Audi Q7 3.0 TDI.

      Similar problems frequently affect other Bosch EDC16CP34 units installed in the same location, including 0281012772 / 4L0907401, 0281012919 / 4L0907401, 0281013689 / 4L0910401M, and 0281013690 / 4L0910401L. These engine control units share nearly identical hardware architecture, with the main differences relating to software versions and vehicle-specific configuration used across different Audi Q7 3.0 TDI variants.

      In this article, we explain the most common failure symptoms of the 0281013691 / 4L0910401K ECU, the typical causes of water intrusion, CAN communication issues, and a practical solution in the form of a ready-to-install IMMO OFF Plug & Play engine ECU that works without immobilizer programming or data cloning.

      Read more
      Płatności Shoper