Opel ABS pumps at ECUSale
Each ABS assembly consists of a hydraulic block with the pump and a control unit bolted to it. On Opel units the labels usually show three kinds of numbers: the GM number (e.g. 13277812 or 13375034), a two- or three-letter version code (e.g. FB, AQ, AD9, AVT) and the manufacturer numbers of the block and control unit starting with 0265. We offer complete assemblies – the pump together with the control unit.
How to choose an ABS pump for an Opel
Compare with the labels on your module:
- the GM number together with the version code (e.g. 13282282 FE),
- the hydraulic block number (e.g. 0265232288),
- the control unit number (e.g. 0265800422 or 0265800796),
- the model, year and engine of the car.
A matching GM number alone is not enough. Our range includes examples that show this well: block 0265232288 FE comes with control unit 0265800422 and with control unit 0265800796, and GM number 13375034 appears in two different assemblies (AD9 with block 0265238098 and AVT with block 0265252688). So always compare all the numbers. The VIN helps confirm the car version but does not replace the labels. If in doubt, send us a photo of the module.
Opel ABS pumps – examples from our range
| Model |
GM number / code |
Hydraulic block / control unit |
| Corsa D |
13277812 FB |
0265232238 / 0265800422 |
| Corsa D |
13236012 AQ |
0265231537 / 0265800422 |
| Corsa D |
13282282 FE |
0265232288 / 0265800422 or 0265800796 |
| Corsa D |
13337843 AFA |
0265232639 / 0265800983 |
| Meriva B |
13354301 AB6 |
0265238000 / 0265950820 |
| Meriva B |
13375034 AD9 |
0265238098 / 0265951794 |
| Meriva B |
13375034 AVT |
0265252688 / 0265952250 |
| Antara, Chevrolet Captiva |
95112928 AP7 |
control unit 20946171 |
| Combo, Fiat Doblo |
00051902577 |
10021207674 / 10096116093 |
The table shows examples from the current range, not a complete list of applications. The exact models, years and engines for each number are given on the product page.
Is coding needed after replacement?
It depends on the model. According to the product descriptions, Corsa D pumps with matching numbers usually do not need additional coding, while on the Meriva B coding and adaptation with diagnostic software (e.g. Tech2 or OP-COM) are usually required. In every case the brake system must be bled after fitting. The requirements for each number are in the product description.
Example ABS pumps for Opel
Compare the numbers with the labels on your module before ordering.
Symptoms of a faulty ABS pump or control unit
- ABS, ESP or traction control warning light on the dashboard,
- pump, valve or control unit supply faults in the diagnostics,
- no communication with the ABS module,
- ABS not working when braking.
The ABS light is often caused by a faulty wheel speed sensor, reluctor ring or wiring rather than the pump itself – so run a diagnosis before buying. Engine control units for Opel are in the Opel engine control units category, and comfort modules in Opel BCM and CIM modules.
Testing, warranty and delivery
Every module is checked before dispatch on a test bench – connected to power and diagnostic tools outside the vehicle. The warranty period and terms are given in each product description. Before ordering you can check delivery times and shipping costs, payment methods and our returns and complaints policy.
Can't find your part number?
Send us a photo of the full label of the original module, the VIN and details of the engine. We will check the numbers and availability.
Ask about an Opel ABS pump →
FAQ – Opel ABS pumps
| Question |
Answer |
| Is the GM number, e.g. 13375034, enough? |
No. The same GM number appears in different assemblies. Also compare the version code (e.g. AD9, AVT) and the block and control unit numbers. |
| What do the letters after the GM number mean? |
They are the version code of the assembly, e.g. FB, AQ, FE, AB6 or AD9. It should match the code on your module. |
| Does a Corsa D pump need coding? |
According to the product descriptions, usually not if the numbers match. The brake system must always be bled, though. |
| Does a Meriva B pump need coding? |
Usually yes – coding and adaptation are done with diagnostic software, e.g. Tech2 or OP-COM. |
| Does the Antara pump fit a Chevrolet Captiva? |
Assembly 95112928 AP7 is listed for selected versions of the Opel Antara and Chevrolet Captiva. The numbers on the module decide. |
| Are the pumps checked before dispatch? |
Yes, every assembly is tested on a bench before dispatch. |