Skip to main content
English €
Open search engine
Search
Close search engine Clear Search
Products in the cart: 0. See details
Your cart is empty

Opel ABS Pumps

Filters
Subcategories and filters
Filters

in category: Opel ABS Pumps

Subcategories

Back to: ABS Pumps
  • Opel ABS Pumps

Chosen Filters

Clear

Price

Vendor

Vendor
Products: 13

ABS pumps for Opel – Corsa D, Meriva B, Antara and Combo

This category contains used, tested ABS pumps with control unit for Opel. Most are assemblies for the Corsa D and Meriva B with a 0265… hydraulic block and a 0265… control unit, plus pumps for the Antara (shared with the Chevrolet Captiva) and a pump listed for the Opel Combo and Fiat Doblo.

Match the assembly by the GM number with its two- or three-letter version code and by the numbers on the module labels. Other brands are in the ABS pumps category.

Not sure which ABS pump fits your Opel? Send a photo of the module labels →

Products: 13

List of products

Price: from highest Default Product name: A to Z Product name: Z to A Price: from lowest Price: from highest
Product code 0265252688 Producer code 13375034

0265252688 AVT 0265952250 ABS pump with control unit Opel Corsa D

Manufacturer Bosch
Price €430.95
Price €350.36
Product code 0265951794 Producer code 0265238098

0265238098 0265951794 ABS pump with control unit Opel Meriva B – refurbished

Manufacturer Bosch
Price €362.90
Price €295.04
Product code 0265238098 Producer code 13375034

0265238098 0265951794 ABS pump with control unit Opel Meriva B

Manufacturer Bosch
Price €317.54
Price €258.16
Product code 20946171AN4 Producer code 95196736

95196736 20946171 ABS pump with control unit Chevrolet Captiva Antara

Manufacturer ATE
Price €294.86
Price €239.72
Product code 0265232639 Producer code 0265800983

0265232639 AFA 0265800983 ABS pump with control unit Opel Corsa D

Manufacturer Bosch
Price €204.13
Price €165.96
Product code 0265238000 Producer code 13354301

0265238000 0265950820 ABS pump with control unit Opel Meriva B

Manufacturer Bosch
Price €181.45
Price €147.52
Product code 20946171 Producer code 95112928

95112928 20946171 ABS pump with control unit Opel Antara Captiva

Manufacturer ATE
Price €181.45
Price €147.52
Product code 0265242277 Producer code 13426850

13426850 0265242277 0265956075 ABS pump with control unit Opel Meriva B

Manufacturer Bosch
Price €136.09
Price €110.64
Product code 10021207674 Producer code 00051902577

00051902577 10096116093 ABS pump with control unit Fiat Doblo Combo

Manufacturer ATE
Price €124.75
Price €101.42
Product code 0265232238 Producer code 0265800422

0265232238 0265800422 ABS pump with control unit Opel Corsa D

Manufacturer Bosch
Price €102.07
Price €82.98
Product code 0265231537 Producer code 0265800422

0265231537 0265800422 ABS pump with control unit Opel Corsa D

Manufacturer Bosch
Price €102.07
Price €82.98
Product code 0265800422 Producer code 0265232288

0265232288 0265800422 ABS pump with control unit Opel Corsa D

Manufacturer Bosch
Price €102.07
Price €82.98
Product code 0265800796 Producer code 0265232288

0265232288 0265800796 ABS pump with control unit Opel Corsa D

Manufacturer Bosch
Price €102.07
Price €82.98

Opel ABS pumps at ECUSale

Each ABS assembly consists of a hydraulic block with the pump and a control unit bolted to it. On Opel units the labels usually show three kinds of numbers: the GM number (e.g. 13277812 or 13375034), a two- or three-letter version code (e.g. FB, AQ, AD9, AVT) and the manufacturer numbers of the block and control unit starting with 0265. We offer complete assemblies – the pump together with the control unit.

How to choose an ABS pump for an Opel

Compare with the labels on your module:

  • the GM number together with the version code (e.g. 13282282 FE),
  • the hydraulic block number (e.g. 0265232288),
  • the control unit number (e.g. 0265800422 or 0265800796),
  • the model, year and engine of the car.

A matching GM number alone is not enough. Our range includes examples that show this well: block 0265232288 FE comes with control unit 0265800422 and with control unit 0265800796, and GM number 13375034 appears in two different assemblies (AD9 with block 0265238098 and AVT with block 0265252688). So always compare all the numbers. The VIN helps confirm the car version but does not replace the labels. If in doubt, send us a photo of the module.

Opel ABS pumps – examples from our range

Model GM number / code Hydraulic block / control unit
Corsa D 13277812 FB 0265232238 / 0265800422
Corsa D 13236012 AQ 0265231537 / 0265800422
Corsa D 13282282 FE 0265232288 / 0265800422 or 0265800796
Corsa D 13337843 AFA 0265232639 / 0265800983
Meriva B 13354301 AB6 0265238000 / 0265950820
Meriva B 13375034 AD9 0265238098 / 0265951794
Meriva B 13375034 AVT 0265252688 / 0265952250
Antara, Chevrolet Captiva 95112928 AP7 control unit 20946171
Combo, Fiat Doblo 00051902577 10021207674 / 10096116093

The table shows examples from the current range, not a complete list of applications. The exact models, years and engines for each number are given on the product page.

Is coding needed after replacement?

It depends on the model. According to the product descriptions, Corsa D pumps with matching numbers usually do not need additional coding, while on the Meriva B coding and adaptation with diagnostic software (e.g. Tech2 or OP-COM) are usually required. In every case the brake system must be bled after fitting. The requirements for each number are in the product description.

Example ABS pumps for Opel

Compare the numbers with the labels on your module before ordering.

Symptoms of a faulty ABS pump or control unit

  • ABS, ESP or traction control warning light on the dashboard,
  • pump, valve or control unit supply faults in the diagnostics,
  • no communication with the ABS module,
  • ABS not working when braking.

The ABS light is often caused by a faulty wheel speed sensor, reluctor ring or wiring rather than the pump itself – so run a diagnosis before buying. Engine control units for Opel are in the Opel engine control units category, and comfort modules in Opel BCM and CIM modules.

Testing, warranty and delivery

Every module is checked before dispatch on a test bench – connected to power and diagnostic tools outside the vehicle. The warranty period and terms are given in each product description. Before ordering you can check delivery times and shipping costs, payment methods and our returns and complaints policy.

Can't find your part number?

Send us a photo of the full label of the original module, the VIN and details of the engine. We will check the numbers and availability.

Ask about an Opel ABS pump →

FAQ – Opel ABS pumps

Question Answer
Is the GM number, e.g. 13375034, enough? No. The same GM number appears in different assemblies. Also compare the version code (e.g. AD9, AVT) and the block and control unit numbers.
What do the letters after the GM number mean? They are the version code of the assembly, e.g. FB, AQ, FE, AB6 or AD9. It should match the code on your module.
Does a Corsa D pump need coding? According to the product descriptions, usually not if the numbers match. The brake system must always be bled, though.
Does a Meriva B pump need coding? Usually yes – coding and adaptation are done with diagnostic software, e.g. Tech2 or OP-COM.
Does the Antara pump fit a Chevrolet Captiva? Assembly 95112928 AP7 is listed for selected versions of the Opel Antara and Chevrolet Captiva. The numbers on the module decide.
Are the pumps checked before dispatch? Yes, every assembly is tested on a bench before dispatch.

    Automotive Electronics Manufacturers

    ECU Engine Controllers, ABS Pumps, BCM Modules and automotive electronics.

    FAQ – Frequently Asked Questions

    1. Are the products tested before shipping?

    Yes, every ECU engine controller, BSI module, BCM module, ABS module, transmission control unit, and other automotive electronic module is electronically tested before shipment. Each unit is checked for proper communication and correct operation to ensure you receive a fully tested product ready for installation.

    2. Does the ECU engine controller require programming or coding after installation?

    Whether programming or coding is required depends on the version of the product. We offer VIRGIN, IMMO OFF, and Plug & Play ECU engine controllers. Information about any required programming or coding is always clearly stated in the product description. In many cases, the unit can be installed and used without any additional coding or adaptation.

    3. How do I choose the correct part for my vehicle?

    The most important step is to compare the part numbers found on your original unit. Pay special attention to the Bosch, Siemens, Magneti Marelli, Continental, or vehicle manufacturer's OEM part number. If you are unsure, simply send us a photo of your existing module or provide your vehicle's VIN, and our specialists will help you identify the correct part.

    4. Are the products covered by a warranty?

    Yes, all ECU engine controllers, ABS modules, BCM modules, BSI modules, transmission control units, and other automotive electronic modules offered in our store are covered by a warranty. Every product is carefully tested and prepared before shipment. If you experience any issues, our technical support team is available to assist with diagnostics and help resolve the problem quickly and efficiently.

    5. What payment methods are available in the store?

    We offer secure online payments processed through Stripe and PayPal. Customers can pay using a credit or debit card, Apple Pay, Google Pay, Klarna, online banking payments, or a traditional bank transfer. After placing an order, you will receive a secure payment link to complete your purchase safely and conveniently.