Peugeot Citroën ECU engine controller 9650602680 VIRGIN Plug & Play
9650602680 IAW6LP1.02 is an original Magneti Marelli ECU engine controller used in selected Peugeot and Citroën petrol vehicles. The module has been professionally prepared in VIRGIN Plug & Play condition, meaning it is reset, tested and ready for installation without cloning data from the original ECU.
After installation, the ECU automatically adapts to the vehicle, making it an ideal solution in cases of damaged ECU, no communication with the engine controller or engine starting problems. Every unit is tested before dispatch and supplied with warranty.
Compatibility of the 9650602680 IAW6LP1.02 ECU
The 9650602680 / IAW 6LP1.02 ECU engine controller can be found in vehicles such as:
- Peugeot 307 – selected 2.0 16V petrol versions, approximately 2001–2005
- Citroën – selected petrol models using the Magneti Marelli IAW6LP1.02 ECU
- Peugeot / Citroën 2.0 16V – petrol engines, mainly from the EW10 engine family
The most important compatibility criterion is the number on the original ECU label. Before purchase, compare the 9650602680 reference and IAW6LP1.02 designation. If the numbers match, the ECU is the correct replacement.
Most common symptoms of IAW6LP1.02 ECU failure
- engine starting problems,
- immobiliser faults or no start authorisation,
- engine stalls after starting,
- internal ECU errors,
- damage caused by electrical short circuits,
- unstable engine operation despite correct wiring and components.
Why choose the 9650602680 ECU in VIRGIN version?
The offered 9650602680 IAW6LP1.02 ECU engine controller is prepared in VIRGIN Plug & Play condition. This is not a standard used module locked to previous vehicle data. The ECU has been reset, tested and prepared for adaptation to another vehicle.
This makes installation significantly easier – there is no need to read data from the original ECU or perform ECU cloning. This is especially important when the original ECU is completely dead, water damaged or not communicating with diagnostics.
Compatible references and designations
- 9650602680
- IAW6LP1.02
- IAW 6LP1.02
- Magneti Marelli IAW6LP1.02
FAQ – 9650602680 IAW6LP1.02 ECU engine controller
Does the 9650602680 IAW6LP1.02 ECU fit Peugeot 307 2.0 16V?
Yes, the 9650602680 IAW6LP1.02 ECU is used in selected versions of the Peugeot 307 2.0 16V. However, before purchase you should always compare the number from the original ECU label, as different ECU versions may have been installed in these models.
Is the IAW6LP1.02 9650602680 ECU Plug & Play?
Yes, the offered ECU is prepared in VIRGIN Plug & Play condition. This means the module is reset, ready for installation and automatically adapts to the vehicle after installation.
Does the 9650602680 ECU require cloning data from the original ECU?
No. This unit is prepared in VIRGIN condition, therefore cloning data from the original ECU is not required. It is an ideal solution when the original ECU is damaged, water affected or not communicating.
How can I check if Magneti Marelli IAW6LP1.02 fits my Citroën or Peugeot?
The safest method is to compare the numbers from the original ECU housing. If the label contains 9650602680 and IAW6LP1.02, the ECU should be compatible with the vehicle.
Can the 9650602680 ECU solve no communication problems with the ECU?
Yes, if the issue is caused by a faulty engine controller, replacing it with a working 9650602680 IAW6LP1.02 module may restore diagnostic communication and engine starting. Before installation, it is recommended to check power supply, grounds and wiring.
Is the IAW6LP1.02 ECU tested before shipping?
Yes, every ECU is tested before dispatch. The module is electronically checked, prepared for installation and supplied with warranty.
