ECU Engine Control Unit Plug & Play EGR OFF / DPF OFF Available – SID208 S180129102B VIRGIN
Original SID208 engine control unit with part numbers S180129102B and 9676721380, professionally tested and prepared in VIRGIN Plug & Play mode. The ECU is fully bench tested, communication verified and supplied with warranty.
This ECU is prepared as VIRGIN, meaning the immobilizer data has been cleared and the module is ready for automatic adaptation during installation and first programming procedure. In many applications this works as a practical Plug & Play solution without the need for EEPROM transfer or ECU cloning.
Optional software modifications such as EGR OFF and DPF OFF are available for selected SID208 versions.
Compatible vehicle applications
- Fiat Ducato 2.2 Multijet – 2011-2021
- Peugeot Boxer 2.2 HDI – 2011-2021
- Citroen Jumper 2.2 HDI – 2011-2021
- Ford Transit 2.2 TDCI – selected SID208 applications
Compatible with selected Euro 5 and Euro 6 diesel engines including: 2.2 HDI, 2.2 TDCI and 2.2 Multijet. Compatibility should always be verified by matching the original ECU numbers: S180129102B / 9676721380.
Common SID208 ECU failure symptoms
- No communication with engine ECU
- Vehicle cranks but does not start
- Injector driver faults
- Cooling fans running permanently
- CAN communication errors
- Water damaged ECU
- Internal processor or power supply failure
- Fault codes related to DPF or EGR systems
Every ECU is professionally checked before shipping. The module is tested for diagnostic communication, power supply operation and CAN network activity.
FAQ – SID208 S180129102B 9676721380 VIRGIN ECU
Does SID208 S180129102B VIRGIN ECU work Plug & Play in Fiat Ducato 2.2 Multijet?
Yes. This VIRGIN ECU is prepared for automatic adaptation in compatible Fiat Ducato 2.2 Multijet vehicles during programming and installation.
Is SID208 9676721380 compatible with Peugeot Boxer 2.2 HDI?
Compatibility should always be confirmed by matching the original ECU numbers installed in the vehicle. Matching S180129102B and 9676721380 is the safest compatibility check.
Can I install a VIRGIN SID208 ECU after water damage in Citroen Jumper 2.2 HDI?
Yes. SID208 ECUs are often replaced after water intrusion, corrosion or internal short circuit damage. A tested VIRGIN replacement ECU is usually the fastest repair solution.
Is DPF OFF or EGR OFF available for SID208 S180129102B ECU?
Yes. Optional DPF OFF and EGR OFF modifications are available for selected SID208 software versions used in Fiat Ducato, Boxer and Jumper 2.2 diesel vehicles.
Does SID208 VIRGIN require ECU cloning from the original controller?
No. A VIRGIN SID208 engine control unit does not normally require cloning because immobilizer and previous vehicle data are removed before shipping.