What you get when you buy S180129303A
Water – the main cause of SID208 failure
SID208 units are most often damaged by water: a short circuit occurs on the injector side and the ECU stops sending the signal to the injectors, so the engine will not start. The housing of this unit is protected against water but is not waterproof – protect the ECU from flooding and make sure the water drains in the vehicle are clear. More in our articles Broken SID208 ECU – what to do? and SID208 – repair or replacement?.
What it fits
Fits the Boxer and Jumper 2.2 HDi if your ECU has the same numbers:
- Continental number: S180129303A
- Software number S/W: 9691520280
Ignore the other markings on the sticker. The full range is in the Peugeot and Citroën categories, e.g. S180129303C, S180129001C, S180129001E, S180129201N.
How we prepared this unit
An unrepaired unit with a refurbished housing protected against water, though not waterproof. We test it on the bench and in a vehicle.
Virgin version: the ECU programs itself after fitting, with no coding and no injector coding; it needs a working immobiliser. Optional EGR OFF and DPF OFF, 6-month warranty, and step-by-step fitting in our guide SID208 Virgin ECU installation guide.
Important: information after purchase
- Does the vehicle have air conditioning?
- Gearbox: manual or automatic?
Without these two details we cannot prepare the right software version – one number has two possibilities.
Frequently asked questions about the S180129303A ECU for Boxer / Jumper
Will S180129303A fit with a software number other than 9691520280?
No. The Continental number S180129303A and the S/W number 9691520280 must be the same as on your ECU label.
|
Has S180129303A been repaired?
No. The electronics have never been repaired; the housing is refurbished and protected against water.
|
Can I order EGR OFF or DPF OFF with S180129303A?
Yes, we do both on request before shipping.
|
