Volkswagen ABS pumps at ECUSale
An ABS assembly consists of two parts: the hydraulic block with the pump and the control unit (electronic module) attached to it. Each has its own number – the pump starts with 1K0614517 or 6R0614117, the control unit with 1K0907379 or 6R0907379. The labels also show the manufacturer numbers (e.g. 10021202204, 10096103153). We offer complete assemblies – the pump together with the control unit.
How to choose an ABS pump for a Volkswagen
The key rule: compare both numbers. Before ordering, check on your module:
- the pump number with the letter ending (e.g. 1K0614517BK),
- the control unit number with the ending (e.g. 1K0907379AP),
- the manufacturer numbers on the labels,
- whether the car has ESP – some assemblies in our range are listed as ABS/ESP.
The same 1K0614517 pump comes with different control units, and different number endings mean different equipment versions. The VIN lets you check the car version but does not replace the numbers on the module. The same assemblies were used in Audi, Seat and Skoda – see also Skoda ABS pumps.
VW pump and control unit numbers – examples from our range
| Pump number |
Control unit number |
Notes from the product description |
| 1K0614517BK |
1K0907379AP |
Golf V / VI, Touran, Passat B6, Audi A3 8P, Seat Leon II, Skoda Octavia II – selected versions |
| 1K0614517BE |
1K0907379AJ |
ABS/ESP assembly |
| 1K0614517BJ |
1K0907379AN |
ABS/ESP assembly |
| 1K0614517DN |
1K0907379BK |
complete assembly, tested |
| 1K0614517DE |
1K0907379BJ |
complete assembly, tested |
| 1K0614517ED |
1K0907379BM |
VW, Skoda, Audi |
These are examples from our range, not a complete list. The model range for each number is given on the product page.
Coding after replacement
After fitting an ABS pump, the brake system must be bled. For the VAG assemblies in our range it is usually also necessary to transfer the coding from the old control unit – e.g. with VCDS – and carry out adaptation and a sensor test. If the control unit has the same number as the old one, copying the coding is usually sufficient. Details for each assembly are given in the product description.
Example VW ABS pumps
Compare each number with the labels on your module.
Symptoms of a faulty ABS pump or control unit
- ABS and ESP warning lights on,
- pump or valve supply faults in the diagnostics,
- no communication with the ABS control unit,
- ABS or ESP not working while driving.
An ABS warning light does not always mean a damaged pump – wheel speed sensors, reluctor rings, wiring or power supply cause similar faults. Run a diagnosis first. Engine control units for these cars are in the Volkswagen engine control units category.
Tests, warranty and delivery
Every module is checked before dispatch on a test bench – connected to power and diagnostic tools outside the vehicle. The warranty period and terms are given in each product description. Before ordering you can check delivery times and shipping costs, payment methods and our returns and complaints policy.
Can't find your part number?
Send us a photo of the full label of the original module, the VIN and details of the engine and gearbox. We will check the numbers and availability.
Ask about a VW ABS pump →
FAQ – Volkswagen ABS pumps
| Question |
Answer |
| Is the pump number 1K0614517 enough? |
No. Compare the pump number with its ending and the 1K0907379 control unit number. The same pump comes with different control units. |
| Does an ABS pump from a Golf fit a Skoda Octavia II? |
Some assemblies are listed as shared between VW, Audi, Seat and Skoda. The numbers on the module decide, not the car brand. |
| Does the control unit need coding after replacement? |
Usually the coding must be transferred from the old control unit, the system bled and an adaptation carried out. Details are in the product description. |
| Do you sell the pump or control unit separately? |
In this category we offer complete assemblies – the pump with the control unit. |
| Does the pump fit a car with ESP? |
Some assemblies are listed as ABS/ESP. Check the numbers and the car's equipment before ordering. |
| Are the pumps tested? |
Yes. Before dispatch we check, among other things, the pump motor, the valves and communication with the control unit. |